2010-15 Toyota Prius Liftgate Handle Garnish - 1ABMD00088

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Includes:   with Emblem Provision
  • Finish:   Smooth - Paint to Match


  • Bezel/Trim/Garnish only
  • Black (Paint To Match) Finish
    • Buyer can paint to any color desired or install as is
  • Correct depression/mounting area for the OE Emblem
  • Direct replacement
  • Built to strict quality control standards

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 


It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the Tailgate Panel (0:23)
    • Pry off the top panel with a trim tool
    • Pop the side trims off with a trim tool
    • Pop off the bottom trim with a trim tool
    • Pry off the middle trim with a trim tool
  2. step : Removing the Outer Trim (4:18)
    • Remove the 10mm nuts from the outer trim
    • Pry out the outer trim with a trim tool
    • Slide the handle out of the outer trim
  3. step : Installing the Outer Trim (6:18)
    • Line up the studs on the outer trim with the holes on the hatch
    • Press the outer trim into place
    • Tighten the 10mm bolts to the outer trim
    • With soapy water and a pick, pull the weatherstripping out beneath the window so it's realigned
  4. step : Installing the Tailgate Panel (7:45)
    • Press the middle trim into place
    • Press the lower trim into place
    • Press the side trims into place
    • Press the upper trim into place

Tools needed for replacement:

    General Tools

  • Pick

  • Materials, Fluids, and Supplies

  • Soapy Water

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2015Toyota Prius Toyota Prius Smooth - Paint to Match Liftgate Handle Garnish with Emblem Provision
Part #: 1ABMD00088

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:10 min)