Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Light Option:   Halogen

Specifications

  • LH (Driver Side)
  • Replaces dealer part numbers: 81170-47211, 8117047211
  • Includes lens and housing
  • Bulbs not included
  • Correct for models with Halogen Style Headlights
    • Does not fit models with LED Style Headlights
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Bumper Cover (0:31)
    • Pry up the push clips with a flat blade screwdriver
    • Remove the five clips from the top of the bumper
    • Remove the 10mm bolts from the bumper
    • Raise and support the vehicle
    • Remove the 10mm bolts from the splash shield
    • Remove the three push clips from the splash shield
    • Pull the splash shield down to reach the headlight wiring harness
    • Disconnect the headlight wiring harness
    • Remove the clip from the fender liner on either side with a flat blade screwdriver
    • Remove the 10mm bolt from the fender liner
    • Pop the bumper cover out of its clips
    • Lift the bumper up and off
  2. step : Removing the Headlight (5:13)
    • Remove the three 10mm bolts from the headlight
    • Release the headlight from the two clips on the top
    • Release the headlight from the clip on the bottom
    • Pull the headlight out
    • Disconnect the wiring harness
    • Twist the bulb socket counterclockwise out of the light
  3. step : Installing the Headlight (7:38)
    • Remove the shipping stickers
    • Twist the bulb clockwise into the light
    • Connect the wiring harness
    • Insert the headlight into place
    • Tighten the three 10mm bolts to the headlight
  4. step : Installing the Bumper Cover (10:38)
    • Insert the bumper cover into place
    • Snap the clips on the bumper in
    • Align the fender liner
    • Press in the clip to either side of the fender liner
    • Tighten the 10mm bolt to the fender liner
    • Tighten the 10mm bolt to the bumper cover
    • Press in the push clips to the bumper cover
    • Place the guard onto the bumper cover
    • Press in the push clips
    • Connect the turn signal wiring harness
    • Tighten the 10mm bolts to the splash shield
    • Press on the three clips to the splash shield

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2011Toyota Prius Toyota Prius Halogen Headlight Driver Side
Part #: 1ALHL01874


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(15:02 min)