1AAHK00093-2010-11 Cadillac SRX Front 4 Piece CV Axle Shaft Set

Replaces

2010-11 Cadillac SRX Front 4 Piece CV Axle Shaft Set DIY Solutions ADS00127

1AAHK00093
FREE SAME DAY SHIPPING
Save 33%
List: $414.95 Save: $138.00
Part 1AAHK00093

Out of Stock

Free GROUND SHIPPING

Close



DIY Solutions
Brand #: ADS00127
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Hub Assemblies
  • Set Quantity:   4 Piece
  • Bearing Type:   Ball Bearing

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a single purchase of a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:33)
    • Loosen the lug nuts with the vehicle on the ground with a 22 mm or 7/8 in socket
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Caliper and Bracket (1:33)
    • Remove the two 18 mm bolts from the brake caliper bracket
    • Slide the brake caliper and brake caliper bracket off the rotor
    • Hang the brake caliper from the coil spring with a bungee cord
  3. step : Removing the Brake Rotor (3:04)
    • Remove the T30 screw from the center of the brake rotor
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Removing the Wheel Hub (3:39)
    • Spray rust penetrant on any rusty bolts on the wheel hub
    • Set a pry bar between the wheel hub splines to secure it
    • Remove the 1 and 1/4 in axle nut from the wheel hub, using air tools if necessary
    • If the axle is still, tap a center punch into the center with a hammer to loosen it
    • Remove the 10 mm bolt from the speed sensor
    • Loosen the 18 mm bolts from the wheel hub
    • Gently tap the rear of the hub with a hammer to loosen it
    • Remove the hub
  5. step : Installing the Wheel Hub (9:07)
    • Clean the backing shield
    • Clean the mating surface with a wire brush
    • Coat the spacer with brake grease
    • Put the backing plate into place
    • Put the wheel hub on and tighten the 18 mm bolts by hand
    • Tighten the 18 mm bolts with a socket and ratchet
    • Torque the 18 mm bolts to 125 foot-pounds
    • Tighten the 10 mm bolt to the speed sensor
    • Insert the axle nut into place and tighten it with a 1 and 1/4 in socket and ratchet and pry bar
    • Torque the axle nut to 184 foot-pounds
  6. step : Installing the Brake Rotor (13:12)
    • Remove any rust from the backside of the rotor with a wire brush
    • Insert the rotor into place
    • Tighten the T30 Torx bolt to the rotor
  7. step : Installing the Brake Caliper and Bracket (13:58)
    • Remove the brake caliper and bracket from the bungee cord
    • Place the brake caliper and bracket on the rotor
    • Tighten the 18 mm bolts to the brake caliper bracket
    • Torque the 18 mm bolts to 148 foot-pounds
  8. step : Reinstalling the Wheel (15:17)
    • Slide the wheel into place
    • Start the 22 mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Air Powered Tools

  • 1/2 Inch Air Impact Gun

  • General Tools

  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Bungee Cord
  • Anti-Seize Grease
  • Cloth Rags

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 18mm Socket
  • 10mm Socket
  • 22mm Socket

  • Sockets - SAE

  • 7/8 Inch Socket
  • 1-1/4 Inch Socket

  • Star Drivers & Sockets

  • T30 Driver


Fits the following Makes:

Year Make Model Description
2010-2011Cadillac SRX Cadillac SRX V6 3.0L Front 4 Piece CV Axle Shaft Set

Part Interchange

Brand Label Part Number
ACDelco FW390
Cadillac 22743793
Cadillac 22743794
Cadillac 20861588
Cadillac 20861589
Cardone New 66-1547
Cardone New 66-1546
Cardone Select 66-1547
Cardone Select 66-1546
Chicago Rawhide BR930778
DIY Solutions ADS00127
DIY Solutions ADS00094
DIY Solutions ADS00093
GSP NCV10022
GSP NCV10012
General Motors 7467845
General Motors 13504971
General Motors 13589508
General Motors 13580489
General Motors 13502789
General Motors OEM 13504971
General Motors OEM 13580489
General Motors OEM 13502789
General Motors OEM 7467845
General Motors OEM 13589508
Hollander 447-00484L
Hollander 447-00483R
Hollander 538-00227
MOOG Hub Assemblies 513289
Raybestos 713289
Raybestos Brakes 713289
SKF BR930778
Saab 13502789
Saab 13504971
Timken HA590393

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: ADS00127
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2010-11 Cadillac SRX Front 4 Piece CV Axle Shaft Set DIY Solutions ADS00127-1AAHK00093 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.