Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Headlights
      (2) Tail Lights

Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Grille (0:35)
    • Twist off the clips from the grille with a flat blade screwdriver
    • Pry out the clips on both sides
    • Remove the clips from the bottom of the grille
    • Pull out on both sides of the grille
    • Release the harness and pull out the grille
  2. step : Removing the Headlight Assembly (1:42)
    • Remove two Phillips screws underneath the fender
    • Pull back the panel and remove two 10mm bolts
    • Remove two 8mm bolts at the top of the headlight
    • Disconnect the harness and pull the headlight up and out
  3. step : Servicing the Headlight Assembly (2:47)
    • Lift up the tab on the harness and pull it free
    • Twist the socket counterclockwise to remove the bulb
    • Twist the socket clockwise to lock the new bulb
    • Reconnect the harness
    • Push the clips to the side with a flat blade screwdriver and pull the bracket off
    • Remove the clips on the bracket with pliers
  4. step : Reinstalling the Headlight Assembly (4:26)
    • Push the clips into the bracket and clip the bracket to the new headlight
    • Line up the pins on the panel and push it directly to the back into place
    • Reconnect the headlight harness
    • Put the washers back into place beneath the headlight
    • Tighten the 8mm bolts
    • Tighten the 10mm bolts underneath the fender
    • Push the panel into place underneath the fender and replace the two Phillips screws
  5. step : Reinstalling the Grille (5:52)
    • Pull the clips out by pushing the tabs on the top and bottom
    • Slide them into place on the grille
    • Line up the clips and push the grille back into place

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2008-2015Nissan Titan Nissan Titan with Utility Bed 4 Piece Set Lighting Kit
Only 2 left in stock
Part #: 1ALHT00212


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:59 min)