Part Details

  • Quantity: Pair

Fit guaranteed

  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs. Occasionally lighting manufacturers do leave test bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, Parking light, Fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Bumper Cover (0:20)
    • Remove the eight push clips from the upper grille cover with a flat blade screwdriver
    • Slide off the upper grille cover
    • Remove the Phillips screw from the recess in either end of the bumper
    • Remove the 10 push clips along the bottom front edge of the bumper
    • Pop the bumper up off the upper pins on each side
    • Pry each edge of the bumper out of its clips
    • Lift the bumper up and off
  2. step : Removing the Headlight (4:16)
    • Remove the 10mm bolt from atop the headlight
    • Remove the two 10mm bolts from the headlight bracket
    • Lift the headlight out and off
    • Disconnect the wiring harness
    • Remove the headlight
    • Remove the 10mm bolt from the headlight bracket
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Installing the Headlight (7:06)
    • Insert the headlight bracket onto the headlight
    • Tighten the 10mm bolt to the headlight
    • Connect the wiring harnesses
    • Insert the headlight into place
    • Tighten the 10mm bolts to the bracket
    • Tighten the 10mm bolt atop the headlight
  4. step : Installing the Bumper Cover (10:50)
    • Insert the bumper into the upper pins
    • Press the bumper into its clips
    • Press in the 10 push clips along the bottom front edge of the bumper
    • Tighten the Phillips screw to the recess in either end of the bumper
    • Insert the upper grille cover into place
    • Press in the eight push clips to the upper grille cover
    • Insert the bumper into the upper pins
    • Press the bumper into its clips
    • Press in the 10 push clips along the bottom front edge of the bumper
    • Tighten the Phillips screw to the recess in either end of the bumper
    • Insert the upper grille cover into place
    • Press in the eight push clips to the upper grille cover

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

4.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
0
0
Great!
Fitment was perfect and the installation video was extremely helpful. Thanks!!!
August 25, 2018
Purchased
1 month ago
2009 Honda Accord EXL
Have not installed will install early Nov, Will write a review then.
October 11, 2017
Purchased
11 months ago
Headlights
They came with bulbs, which was nice and it all fit right, but there was something wrong with the turn signal light so I had to take it to a mic
February 19, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
Are they new or used?
Eddie F on Jun 18, 2017
BEST ANSWER: BRand new, and at a great price. . My Honda dealer wanted 5 times what I paid for them, and it was one day shipping. This a great deal. Makes the far look new.

Vehicle Fit

Year Make Model Description
2008-2012Honda Accord Honda Accord 4 Door Sedan Headlight Pair

This part replaces:

  • DEPO 317-1154R-AF2
  • TYC 20-6880-00-1
  • Hollander 114-50554R
  • Hollander 114-50556L
  • Partslink HO2502130
  • Partslink HO2503130
  • DEPO 317-1154L-AF2
  • TYC 20-6879-00-1
  • OE # 33100TA0A01
  • OE # 33150TA0A01
Part #: 1ALHP00644


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(15:37 min)