Replaces

2007-17 Nissan Altima Rear Driver or Passenger Side Shock Absorber TRQ SBA60716 - 1ASHA00241

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:24)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Shock (1:29)
    • Remove the lower 18mm shock bolt
    • Remove the two 13mm nuts from the shock
    • Remove the upper boot from the shock
    • Slide the boot on the shock up
    • Clamp the shaft with vise grips
    • Remove the 16mm nut from the top of the shock
    • Remove the bushings and grommets and boot from the shock
  3. step : Installing the Rear Shock (5:46)
    • Compress the new shock 3-5 times
    • Remove the protective cap from the shock
    • Press the bevel to the bushing
    • Press the bushing to the upper metal plate
    • Attach the second bushing
    • Slide the boot over the shock
    • Slide on the protective plate
    • Press on the washer and the locking nut
    • Tighten the locking nut with a 17mm wrench and locking pliers
    • Press the rubber cap on
    • Insert the rear shock into place
    • Tighten the two upper 13mm nuts to the shock
    • Torque the upper nuts to 20 foot-pounds
    • Tighten the lower 17mm bolt
    • Torque the lower 17mm bolt to 66 foot-pounds
  4. step : Reattaching the Wheel (13:15)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 83 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 13mm Socket
  • 16mm Socket
  • 18mm Socket

  • Specialty Tools

  • Vise-Grips

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2017Nissan Altima Nissan Altima Rear Driver or Passenger Side Shock Absorber
Part 1ASHA00241
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SBA60716