Replaces

2007-13 Acura MDX Steering & Suspension Kit - 1ASFK04824

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   6 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 6 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:16)
    • Attach the wheel lock key to the locking lug nut
    • Loosen the lug nuts with a breaker bar with the wheel on the ground
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:19)
    • Apply rust penetrant to the sway bar link bolts
    • Break loose the 17mm nut on the top of the sway bar link with a 17mm wrench and a dead blow hammer
    • Counter hold the top sway bar link stud with a 5mm Allen Key and breaker bar
    • Remove the 17mm nut from the top of the sway bar link
    • Thread the 17mm nut partially onto the top stud
    • Break loose the 17mm nut on the bottom of the sway bar link with a 17mm wrench and a dead blow hammer
    • Counter hold the bottom sway bar link stud with a 5mm Allen Key and breaker bar
    • Remove the 17mm nut from the bottom of the sway bar link
    • Thread the 17mm nut partially onto the bottom stud
    • Pull out the bottom sway bar link stud
    • Remove the nut from the top sway bar link stud
    • Pull out the top sway bar link stud
  3. step : Installing the Sway Bar Link (7:01)
    • Remove the 18mm nuts from the new sway bar link
    • Put the sway bar link into place
    • Start the two 18mm nuts onto the sway bar link
    • Counter hold the top ball joint with an 18mm wrench
    • Tighten the top 18mm nut
    • Counter hold the bottom ball joint with an 18mm wrench
    • Tighten the bottom 18mm nut
    • Tighten the two 18mm nuts to 56 foot-pounds of torque
  4. step : Installing the Wheel (9:02)
    • Slide the wheel onto the hub
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds of torque

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench
  • 19mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2013Acura MDX Acura MDX 6 Piece Set Steering & Suspension Kit
Part #: 1ASFK04824


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:21 min)