1ASSP00636-2007-12 Nissan Altima Front Driver & Passenger Side 2 Piece Strut & Spring Assembly Set

Replaces

2009 Nissan Altima Front Driver & Passenger Side 2 Piece Strut & Spring Assembly Set

1ASSP00636-763499-2009
Guaranteed to fit: 2009 Nissan Altima

Fit Details

  • Front or Rear Location: Front
  • Side Location: Driver & Passenger Side

Part Details

  • Set Quantity: 2 Piece

This part replaces:

  • Monroe 172393
  • Monroe 172392
  • KYB SR4226
  • KYB SR4225
FREE SAME DAY SHIPPING
Save 24%
List: $261.95 Save: $62.00
Part 1ASSP00636

Out of Stock

Free GROUND SHIPPING

Close



TRQ
Brand #: SCA57088
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   2 Piece

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    It is important to replace suspension components in pairs. These instructions apply to both driver and passenger sides of the vehicle, even though only one side is shown in the video.

  1. step : Removing the Wheel (0:06)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Remove the hub cap
    • Pull off the wheel
  2. step : Removing the Front Strut (1:10)
    • Remove two of the three 13 mm strut mounting bolts located inside the engine compartment, leaving the last one loose for safety
    • Remove the sway bar link from the strut using a 19 mm wrench to hold the sway bar link and an 18 mm socket to remove the nut
    • Pull the ABS wire retaining grommets from the retaining brackets on the strut
    • Tap out the brake line bracket retaining clip with a hammer and pry bar
    • Remove the brake line hose from the retaining bracket
    • Remove the two lower 21 mm strut mounting bolts from the 21 mm nuts using a 21 mm wrench and socket with breaker bar
    • Pull or tap the two lower bolts out
    • Remove the last 13 mm mounting bolt from the top of the strut
    • Remove the strut
  3. step : Installing the Strut (6:10)
    • Hold the strut in place and loosely replace the three 13 mm mounting bolts at the top
    • Place the knuckle strut mount into the lower strut mounting bracket
    • Replace the two 21 mm lower strut mounting bolts with the 21 mm nuts
    • Replace the ABS wire mounting grommets into the mounting brackets
    • Torque the two 21 mm nuts to 103 ft-lb
    • Replace the brake line hose into the mounting bracket
    • Replace the brake line hose retaining clip
    • Replace the sway bar link with a 19 mm wrench or locking pliers and an 18 mm socket
    • Compress the strut to ride height by either jacking up under the wheel knuckle or lowering the vehicle onto a jack stand placed under the knuckle
    • Torque the three 13 mm top mounting bolts to 26 ft-lb
    • Remove the jack or jack stand from under the wheel knuckle
  4. step : Replacing the Wheel (11:14)
    • Slide the wheel into place
    • Attach the hub cap
    • Start the 21mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle partially to the ground
    • Torque the lug nuts to 83 ft-lb in a crossing or star pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 19mm Wrench
  • 21mm wrench
  • 13mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
The reviews only talk about how easy the installation is. After driving around with these shocks on, how smooth is the ride? Does it make nose, stiff ride or smooth/soft ride?
Preston H August 20, 2017
Quiet. Doesnt seem like a high quality tho. I thought it would drive like a brand new car but it just doesnt. Close but not quite. Good for the price tho
Christopher S August 21, 2017
Has a smooth and soft ride
Chris Y August 21, 2017
I recommend getting the monroe struts the passenger side started clunking after a few months
JEFF J August 22, 2017
Installed these strut/spring assemblies back in January. Ride feels smooth to me. Not stiff at all. Feels exactly the same as the old factory strut/springs assemblies that came with vehicle that I replaced. So far so good. About 12K miles on them. Installed on 09 Altima S 4door
John J N August 22, 2017
No noises rides as smooth as the factory equipment that was taken off, reason i changed them, they were leaking
D A June 19, 2018
To tell you the truth it was a great ride. It wasnt until l installed tut he new struts that i realized just how bad i needed them. I am truly pleased with how they ride.
B E September 11, 2018
I knew I needed struts, at first it was a stiff ride but as I keep using the car the ride has gotten better
M T February 26, 2020
Is top of strut and spring torqued by manufacturers?
Tom B December 17, 2019
From my purchase experience with this item it was torqued to spec. By manufacturers of this brand of struts. It was a very easy/ simple swap out process.
J O December 17, 2019
You would not need to torque any other parts of the strut but you may have to clock some of the parts for the installation. Please do not hesitate to contact us with any further questions.
Emma F December 17, 2019

Fits the following Makes:

Year Make Model Description
2007-2012Nissan Altima Nissan Altima Front Driver & Passenger Side 2 Piece Strut & Spring Assembly Set

Part Interchange

Brand Label Part Number
KYB SR4226
KYB SR4225
KYB Shocks & Struts SR4226
KYB Shocks & Struts SR4225
Monroe 172392
Monroe 172393
Monroe Shocks & Struts 172392
Monroe Shocks & Struts 172393
Unity Automotive 11612
Unity Automotive 11611

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: SCA57088
Product Reviews
4.83/ 5.0
18 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
15
3
0
0
0
Worked Perfectly
Shipping was quick Folks on the toll free number very helpful and patient. Quick and easy install for a shade tree mechanic.
February 15, 2017
Easy install and drives much better
The right needed to be replaced so I replaced them both and could not be happier. It took about an hour and a half to install both. Make sure you get a alignment after the install.
August 8, 2017
Perfect for my car
I never thought it was going to be so easy to place these babies. once again; save tons of money.
December 4, 2017
Struts perfect
I am very happy with struts fit on perfect,no messing with spring compressor fit like a glove.thank you 1A Auto team.
January 30, 2018
Love 1aauto!
I searched all over for my parts for my 2007 Nissan Altima. Ordering was simple and hassle free. The shipping was amazing! Got my parts within 2 days, I wish they carried all my parts because they would definitely get my business above all others. Thanks 1Aauto you guys saved me thousands!!!
April 24, 2018
Exalint servie
they were excellent help on getting the right part for my car the parts are great quality they went on easily thanks and will buy again at this seller
April 26, 2018
Front suspension
I would highly recommend this product to any body that I met my struts were busted on both sides of my 2009 Nissan Altima and now since I have the new ones on the car drives a whole lot better than it did before
April 26, 2018
I LOVE THIS PLACE
Very good customer service. excellent delivery, and always on time. I really do love these guys.
May 9, 2018
Great parts.Great prices
I got a set of struts for my 2008 nissan altima.part number 1ASSP00636.Wow super fast shipping and they look great.Went on very easy.Took about a hour a side.just remember to spray down the sway bar link bolt at top.Was hard to get off.
May 31, 2018
Fit perfectly
Highly recommend fits perfectly to my 2009 Nissan Altima s
July 11, 2018
Perfect fit!
I was a little hesitant about ordering parts online, but after watching their how to videos online, i decided to take a chance. Let me tell you, they did not disappoint. They fit perfectly. Not only that, thay arrived quickly. I am so impressed that i have gone ahead and ordered new rotors and break pads after watching another one of their great instructional videos. I will let you know how tgat goes.
September 11, 2018
Todo muy bien y hechos a la medida para el nissan altima, gracias y seguire como cliente de ustedes
December 4, 2018
The parts were affordable easy to install I loved it
December 12, 2018
good product perfect ride now
make sure you torque top bolts correct lol
November 5, 2019
Novice mechanic feeling like a pro
1A auto sells the most high quality product on the market for a reasonable price. Not only are their products great they send an email with a video detailing how to install the product. 1A auto has helped my family to save hundreds of dollars and not only that, this company brought us closer because we work on our vehicles as a family while we follow the instructions of their YouTube videos. Thanks 1A auto!
February 1, 2020
She loves it
Really ez to install. She loves the ride now. They were the best Christmas present in her opinion
February 4, 2020
I’m happy with my purchase
I bought both the front and Bach struts and I’m happy with my purchase. I will be ordering both the front and back rotors and brakes soon!
February 25, 2020
2007 Nissan Altima valve cover
If you have to replace a valve cover on this type of car. And you may not have done this type of repair. The videos 1A Auto have available, are very helpful. They go threw each step and explain what to look for. They help make the project much easier.
May 7, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Nissan is a registered trademark of Nissan Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Nissan or Nissan Motor Co., Ltd. See all trademarks.

2007-12 Nissan Altima Front Driver & Passenger Side 2 Piece Strut & Spring Assembly Set TRQ SCA57088-1ASSP00636 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2009 Nissan Altima with these options.