These performance headlights are brand new in the box and ready to install!


  • Performance Black Bezel Halogen Headlight Set
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Includes lenses & housings
  • Bulbs not included
  • Direct replacements
  • Built to strict quality control standards

These headlights make great replacements and have good cost savings over the dealer units.

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Fit guaranteed

  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.


  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.


  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.


  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather..
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Quantity: Pair
  • Light Option: Black Bezel
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Accessing the Headlight (0:41)
    • Remove the T25 Torx bolts from the top of the bumper
    • Remove the two 7mm bolts in the wheel well
    • Pull the plastic clip out of the inner fender
    • Pull back the inner fender
    • Remove the 7mm bolt from inside the inner fender
    • Remove the two plastic clips from the bottom of the bumper
    • Remove the three 10mm bolts underneath the bumper
    • Pull the bumper aside
  2. step : Removing the Headlight (2:59)
    • Remove the three 10mm bolts from the headlight
    • Pull the headlight forward and out
  3. step : Servicing the Headlight Bulb (3:39)
    • Twist out the headlight bulb socket
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb into the headlight
    • Twist out the signal light bulb socket
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb into the headlight
    • Disconnect the wiring harnesses
  4. step : Installing the New Headlight (4:44)
    • Connect the wiring harnesses to the new headlight
    • Push the new headlight into place
    • Insert the three 10mm bolts into the headlight
  5. step : Reattaching the Bumper (5:34)
    • Line up the bumper cutout with the washer
    • Push the bumper into place
    • Insert the two plastic clips at the bottom of the bumper
    • Insert the three 10mm bolts into the bottom of the bumper
    • Insert the plastic clip into the inner fender
    • Insert the 7mm bolt behind the inner fender
    • Insert the two 7mm bolts into the wheel well
    • Insert the T25 Torx bolts into the top of the bumper

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
I only need the drivers side replaced. Is it possible for me to only purchase the drivers side?
Winston P on Sep 2, 2018

At this time we do not offer these headlights separately and are only available in a pair.

Thank you!
Does this fit the 2007 Caliber SXT with 2.0 CVVT ?
Ravi A on Jul 11, 2016

Vehicle Fit

Year Make Model Description
2007-2012Dodge Caliber Dodge Caliber Black Bezel Performance Headlight Pair

This part replaces:

  • Partslink CH2505112
  • Hollander 114-00970L, 114-00969R
  • DEPO 334-1118P-AS2
Part #: 1ALHZ00033

Out of Stock

How-to Video:

(07:19 min)