Replaces
Frequently bought together
Part Details
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the hood. Pull the release handle. It's down here, above your knee. Release the safety, which is right here. This hood has hood struts. To replace the hood struts, use a small flat blade screwdriver to pull out this lock. There's another lock at the other side. Support the hood and pop that off of the ball mount. Same thing over here. The hood's going to want to close.
Here's our original hood strut from our vehicle and our brand new one from 1AAuto.com. You can see, it's the same length, same style, little ball connectors with the locks. This should fit great and keep your hood up.
I'm actually going to pull these locks out, just so it makes it easier to pop on. When that is in the lock position, those metal tabs slap around the ball stud that it mounts to. It prevents it from popping off, so to make it easier to go on, I'm just going to pop it up a little bit and just slide them down. Do the same thing for this end. I'm going to pull it up and lay it on top of these two little tabs here. Just lift our hood back up. Install the top one first. It's locked into place.
Just down, install the bottom one. Push this lock back up into place. Same side and use the exact same procedure.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
GSA02130
