Replaces

2006-11 Honda Civic Window Regulator - 1AWRG01953

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This replacement window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • RH (Passenger Side) FRONT
  • Power operation
  • Replaces dealer part numbers: 72210-SNA-A02, 72210-SNA-A03, 72210SNAA02, 72210SNAA03
  • Includes the power window motor
  • Direct replacement
  • Built to strict quality control standards

This window regulator makes a great replacement and has good cost savings over a dealer unit.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:25)
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the switch wiring harnesses
    • Remove the Phillips screw behind the switch panel opening
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Open the push clip with a flat bladed screwdriver
    • Remove the Phillips head screw inside the door handle
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Release the door lock cables with a flat blade screwdriver
    • Remove the plugs from the water shield
    • Disconnect the door lock actuator wiring harness
    • Carefully remove the water shield
  2. step : Removing the Window Regulator (5:30)
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Disconnect the window motor
    • Remove the four 10mm bolts from the regulator
  3. step : Reinstalling the Regulator (8:15)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the10mm bolts into the regulator
    • Connect the window motor
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Installing the Door Panel (11:35)
    • Insert the water barrier into place
    • Press the clips in
    • Connect the door lock actuator
    • Feed the switches into the door panel
    • Connect the door latch cable and close the clip
    • Connect the door lock cable and close the clip
    • Lift the door panel into place
    • Push in the door panel clips
    • Tighten the Phillips screw behind the door handle
    • Slide the hook in
    • Press on the trim piece behind the door handle
    • Tighten the screw behind the switch panel opening
    • Connect the switch panel wiring harnesses
    • Press the switch panel into place

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper
  • Pick

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Window regulator
Great price and fit perfect. Also had the motor to it. I will be buying another part soon.
November 13, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2011Honda Civic Honda Civic Sedan Front Power Window Regulator with Motor Passenger Side
Part #: 1AWRG01953


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(15:36 min)