Replaces

2006-11 Honda Civic Torque Strut Engine Mount - 1AEMT00132

This replacement torque strut engine mount is just what you need to keep your motor & transmission firm in place!

Specifications:

  • Upper Right Torque Strut
  • Direct replacement
  • No modifications needed
  • Replaces dealer part numbers: 50880SNAA82, 50880-SNA-A82
  • Built to strict quality control standards

Replace your broken torque strut engine mount now with this great fitting aftermarket part. It makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Torque Rod (0:20)
    • Place a piece of wood on a floor jack
    • Position the jack beneath the oil pan
    • Raise the jack to support the engine
    • Break lose the three torque rod bolts with a 17mm socket, breaker bar, and socket extension
    • Remove the three bolts from the torque rod
    • Remove the counterweight from the torque rod
    • Slide the torque rod out of the engine bay
  2. step : Installing the Torque Rod (2:40)
    • Apply white grease to the torque rod mounting area
    • Line up the torque rod with the bolt holes
    • Line up the torque rod counterweight
    • Start the three bolts into the torque rod
    • Tighten the torque rod bolts to 47 foot-pounds
    • Lower the jack from underneath the engine

Tools needed for replacement:

    General Tools

  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • White Grease
  • Block of Wood

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 17mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Easy out and easy in. Great product.
This was an easy replace that I included when I did the front motor mount. I do recommend having a little white grease on hand to get this piece to slip in a little easier, just make sure that it is something that is compatible with the bushing on the inside (silicone based grease works best, i think?) Im a weekend warrior and have not mechanic's training, but the products on 1A and the instructional videos that they offer really make all of the difference. I'll be a customer for life.
April 14, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2011 Honda Civic Upper Torque Strut Engine Mount L4 1.8L with Automatic Transmission

This part replaces:

  • OE # 50880SNAA82
Part #: 1AEMT00132

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:00 min)