Replaces

2006-11 Honda Civic Sway Bar Link Pair - 1ASFK02849

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications:

  • Brand New Sway Bar Links
  • Comes as a Pair
    • Fits LH (Drivers Side) & RH (Passenger Side) Front
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:28)
    • Loosen the lug nuts with a 19mm socket with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Sway Bar Links (0:57)
    • Clean off any rust from the nut with a wire brush
    • Spray the rusty parts with rust penetrant
    • Break the nuts free with a 14mm wrench
    • To reach the upper nut, raise a jack underneath the control arm
    • Counter-hold with a 5mm Allen bit
    • Remove the nut with a 14mm wrench
    • Lower the jack
    • Counter-hold with a 5mm Allen key
    • Remove the lower nut with a 14mm wrench
  3. step : Installing the Front Sway Bar Links (5:27)
    • Insert the sway bar link into place
    • Tighten the nuts with a 17mm wrench
    • Counter-hold with a 5mm Allen bit
  4. step : Reattaching the Wheel (6:47)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 17mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
2007 Honda Civic sway bar linkage replacement
Just recently installed both D&P side sway bar linkage to help tighten up front suspension on my 2007 civic with 170K mi. Also replaced both front struts at same time. I would definitely recommend watching the associated video from 1A on replacing the sway bar linkage!! There is one tool that I did not have for this job that would have been very helpful (6mm hex/ Allen head socket or wrench) and is pointed out in the video. Ended up using a mini grinder to remove one of the original linkage bolts due to trying to improvise with an SAE Allen wrench. These replacements fit & work perfectly and reinstallation is a breeze once you get the old ones off. I would definitely recommend them. These new replacements are better engineered and use a hex nut on the back side of the ball/socket to grip with while tightening as opposed to the recessed hex head bolt that is OEM - making this replacement much easier to use.
December 11, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2011Honda Civic Honda Civic Front Sway Bar Link Pair
Part #: 1ASFK02849


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:26 min)