Replaces

2006-11 Honda Civic Shock & Strut Kit TRQ PSA56534 - 1ASSP01094

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Interior Trunk Trim (0:25)
    • Remove the three pins from the side interior trim panel in the trunk
    • Lift the flooring
    • Remove the pin from the side interior trim panel in the trunk
    • Remove the trim panel from the ledge
    • Move the side interior trim out of the way
    • Remove the 14mm nut from the shock with a 5mm allen key and 14mm wrench
    • Remove the plates from the shock
  2. step : Removing the Wheel (3:01)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Removing the Rear Shock Absorber (3:25)
    • Support the lower control arm with a floor jack
    • Remove the lower bolt with a 14mm socket and breaker bar
    • If the bolt snaps, remove it with a hammer and punch
    • Wedge the shock out with a pry bar
    • Remove the shock
  4. step : Installing the Rear Shock Absorber (6:55)
    • Remove the nuts and rubber bushings from the top of the shock absorber
    • Place a washer on the stud of the shock absorber
    • Place a bushing on the washer
    • Place a casing on the stud
    • Insert the shock up into place
    • Press the bolt through the bottom of the shock
    • Thread the nut on to the bolt
    • Jack up underneath the control arm to press the shock into place
    • Place a bushing on the top of the shock
    • Place a washer on the top of the bushing
    • Tighten the 14mm bolt to the top of the shock
    • Torque the bolt to 22 foot-pounds
  5. step : Installing the Interior Trunk Trim (10:14)
    • Insert the interior trunk trim into place
    • Press the trunk hatch trim on
    • Place the flooring on
    • Press the push clips into the interior trunk trim
    • Jack up underneath the shock
    • Torque the bolt to 43 foot-pounds, counter-holding if needed
  6. step : Reattaching the Wheel (12:02)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Side Cutters

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 14mm Wrench

4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
2
0
0
0
Shock/strut change on 2006 Honda Civic Ex coup
The shocks arrrived as promised and looked amazing. This was my first time every installing shocks and because of the video on 1Aauto it was a breeze. The ride quality has been very smooth not stiff or too loose. I highly recommend this part instead of KYB or Monroe (to expensive)
April 11, 2018
Purchased
3 months ago
Low price on good parts
Could have paid more for item like this in a name brand, easy to install, ride is very firm and tight. don't judge these by the price, low price for good parts, and free shipping.AR
January 1, 2018
Purchased
6 months ago
GREAT PRICE AND FAST TURNAROUND
I checked all reputable sites for shocks and struts for my 08 Honda. 1A Auto beat everybody's price by a large margin plus they gave me free shipping!

Parts got here in 3 days just like I was told. Parts are top of the line. I will use 1A for all my parts purchases now!
December 27, 2017
Purchased
7 months ago
Honda Civic shock and struts
The price of this set is great these are by far the cheapest out there. I only had these on for a couple of weeks and so far they are running great and the quality seems good also. I would give this 5 stars but since I only had these on not too long I really don’t know how long they will last.
October 27, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Do these fit a SI, 2007 honda civic coup SI, or what do you recommend?
Billy on Mar 17, 2018
BEST ANSWER: Yes, according to the information you supplied, the part you're looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
I have a 2011 Honda Civic Coupe. Since I'll be replacing the entire front struts with the front strut assembly kit I'd also like to replace the bolts/nuts that attach the front strut assembly to the wheel assembly. What are the correct parts to use?
Bob D on Jun 16, 2018
BEST ANSWER: You should be able to reuse the original hardware in most cases. Unfortunately we do not carry those nuts and bolts, so we cannot offer them if you need to purchase new ones.

Vehicle Fit

  • 2006-2011 Honda Civic Coupe Front & Rear Shock & Strut Kit 4 Piece Set TRQ PSA56534

This part replaces:

  • Hollander 527-50114L
  • Hollander 527-50113R
  • OE # 51602SVAA15, 51602SVAA07
  • OE # 51601SVAA15, 51601SVAA07
  • Monroe 172285
  • Monroe 172284
  • Monroe 5609
  • KYB 343460
  • KYB SR4242
  • KYB SR4241
  • TRQ PSA56534
Part #: 1ASSP01094

TRQ
Brand #: PSA56534

How-to Video:

(12:50 min)