MNSHA00205-2006-11 Honda Civic Rear Driver or Passenger Side Shock Absorber

Replaces

2006-11 Honda Civic Rear Driver or Passenger Side Shock Absorber Monroe OESpectrum 5609

Monroe OESpectrum MNSHA00205 MNSHA00205
FREE SAME DAY SHIPPING
Save 36%
List: $89.95 Save: $32.00
Only 4 left in stock
Part MNSHA00205
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Monroe OESpectrum
Brand #: 5609

Frequently bought together

Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Why Buy Monroe OESpectrum Shock and Struts?

Monroe OESpectrum Shock Absorbers and Struts are designed to be direct replacements while improving handling. Some of their benefits include:

  • Application specific valving
  • Improved filtering of road noise, vibration, and harshness
  • Nitrogen gas charged
  • Upgraded sealing for longer life

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.  Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.  Final shipping costs are available at checkout.

How to Replace Rear Shock Absorber If Lower Bolt Breaks 06-11 Honda Civic

Created on: 2021-01-16

How to repair, install , fix, change or replace your rear shocks, even if the lower bolt breaks on 06, 07, 08, 09, 10, 11 Honda Civic.

  1. step 1 : Removing the Interior Trunk Trim
    • Remove the three pins from the side interior trim panel in the trunk
    • Lift the flooring
    • Remove the pin from the side interior trim panel in the trunk
    • Remove the trim panel from the ledge
    • Move the side interior trim out of the way
    • Remove the 14mm nut from the shock with a 5mm allen key and 14mm wrench
    • Remove the plates from the shock
  2. step 2 : Removing the Wheel
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step 3 : Removing the Rear Shock Absorber
    • Support the lower control arm with a floor jack
    • Remove the lower bolt with a 14mm socket and breaker bar
    • If the bolt snaps, remove it with a hammer and punch
    • Wedge the shock out with a pry bar
    • Remove the shock
  4. step 4 : Installing the Rear Shock Absorber
    • Remove the nuts and rubber bushings from the top of the shock absorber
    • Place a washer on the stud of the shock absorber
    • Place a bushing on the washer
    • Place a casing on the stud
    • Insert the shock up into place
    • Press the bolt through the bottom of the shock
    • Thread the nut on to the bolt
    • Jack up underneath the control arm to press the shock into place
    • Place a bushing on the top of the shock
    • Place a washer on the top of the bushing
    • Tighten the 14mm bolt to the top of the shock
    • Torque the bolt to 22 foot-pounds
  5. step 5 : Installing the Interior Trunk Trim
    • Insert the interior trunk trim into place
    • Press the trunk hatch trim on
    • Place the flooring on
    • Press the push clips into the interior trunk trim
    • Jack up underneath the shock
    • Torque the bolt to 43 foot-pounds, counter-holding if needed
  6. step 6 : Reattaching the Wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement

  • General Tools

    Hammer

    Jack Stands

    Center Punch

    Floor Jack

  • Hex Wrenches

    5mm Hex Wrench

  • Materials, Fluids, and Supplies

    Rust Penetrant

  • Pliers, Cutters & misc Wrenches

    Adjustable Wrench

    Side Cutters

  • Ratchets & Related

    Socket Extensions

    Torque Wrench

    Ratchet

    1/2 Inch Breaker Bar

  • Screwdrivers & Related

    Pry Bar

    Flat Blade Screwdriver

  • Sockets - Metric

    19mm Socket

    10mm Socket

  • Wrenches - Metric

    14mm Wrench

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2006-2011Honda Civic Honda Civic Rear Driver or Passenger Side Shock Absorber

Part Interchange

Brand Label Part Number
DIY Solutions SHO03064

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Monroe OESpectrum
Brand #: 5609
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2006-11 Honda Civic Rear Driver or Passenger Side Shock Absorber Monroe OESpectrum 5609-MNSHA00205 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.