1AEMT00317-2006-11 Honda Civic Front Passenger Side Engine Mount

Replaces

2006-11 Honda Civic Front Passenger Side Engine Mount TRQ

1AEMT00317

Part Details

This part replaces:

  • OE # 50820SNBH01
  • OE # 50820SNBJ02
  • OE # 50820SNB305
  • DEA A65030
  • TRQ MTA34246
FREE SAME DAY SHIPPING
Save 10%
List: $68.95 Save: $7.00
Part 1AEMT00317
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: MTA34246

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Carbon black, which is known to the State of California to cause cancer.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Upper Torque Rod (0:21)
    • Place a piece of wood on a floor jack
    • Raise the jack underneath the oil pan slightly to support the engine
    • Remove the three bolts from the upper torque rod with a 17mm socket and breaker bar
    • Remove the counter weight and the upper torque rod
  2. step : Removing the Front Engine Mount (2:21)
    • Remove the 10mm bolt from the ground strap
    • Remove the 19mm bolt from the mount
    • Loosen the captured 19mm bolt from the mount
    • Remove the 17mm bolt from the mount
    • Carefully remove the mount
    • If the threads are stripped in the engine, tighten a 14/15 tap in the channel
    • Clean out the channel with compressed air
    • Thread the bolt by hand to test for compatibility
    • Remove the two 14mm bolts from the aluminum brace
    • Remove the two bolts on the mount to the frame rail
    • Remove the aluminum brace
  3. step : Installing the Front Engine Mount (9:31)
    • Remove the 17mm bolt from the new mount
    • Loosen the bolt on the brace against the wall with a 14mm socket and ratchet
    • Insert the aluminum brace into place
    • Tighten the 14mm bolts to the aluminum brace
    • Torque the two bolts to 36 foot-pounds
    • Tighten the bolts on the mount to the frame rail to 47 foot-pounds
    • Insert the mount into place
    • Tighten the bolts to the mount
    • Torque the three bolts to 52 foot-pounds
    • Insert the ground strap into place
    • Tighten the 10mm bolt to the strap
  4. step : Installing the Upper Torque Rod (14:58)
    • Insert the torque rod into place
    • Tighten the three bolts to the upper torque rod with a 17mm socket and ratchet
    • Torque the bolts to 47 foot-pounds
    • Lower the jack from the engine

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Paper Towels

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Sockets - SAE

  • Complete SAE Socket Set

  • Specialty Tools

  • Metric Tap and Die Set

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this part fit without any modifications and is it liquid filled or solid? Thank you
Jed A September 26, 2016
Its a solid rubber mount and fits the specific applications as listed
Brian F September 26, 2016
It fit perfect, no mods needed. Not sure how it was filled
Sarah F September 26, 2016
Its solid no modifications necessaryEnter an answer to this question.
Christopher C October 11, 2016
Civic motor mount
Hector M July 31, 2019
Exact fit. Solid, just like Honda OEM.
Mark N September 29, 2019
Are replacement bolts also provided, or can they be purchased here as well?
Christopher T April 12, 2019
This part does not come with the hardware and we do not sell it either.
Peter L April 12, 2019

Fits the following Makes:

Year Make Model Description
2006-2011Honda Civic Honda Civic L4 1.8L Front Passenger Side Engine Mount

Part Interchange

Brand Label Part Number
DEA A65030
DEA Products A65030
DIY Solutions EMT00465
Marmon Ride Control A65030

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: MTA34246
Product Reviews
4.89/ 5.0
18 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
2
0
0
0
Perfect Part!
This part fit my 2008 Honda Civic EX Coupe perfectly. I have no more vibrations when I put it in reverse or when idling at a stop. A lot cheaper than other engine mounts I have been seeing! Do yourself a favor and save some money by ordering this part.
January 25, 2017
Great price, great quality, and instructional video as well!
The part was high-quality and I actually purchased another part initially and circled back around to 1A to grab this one as it was much better. They even provided an installation video which was a lot of help.
September 19, 2018
Perfect fit at a great price
Bought this for my daughters 2008 Honda Civic Coupe. Part is known to fail, which causes vehicle (engine) vibration at low idle. Installation video was spot on - I replaced the part myself in my garage in about an hour with a few metric sockets and a floor jack. Vibration issue solved!!
November 7, 2018
engine mount $49.95 for 2007 civic
I was unsure of this item being after market but the warranty sold me and so far has made the car back to normal no more rumble Thanks Rich
December 3, 2018
Perfect !
This is the exact fit for my vehicle it arrived in a very timely manner & Im very pleased with it ! Ive already ordered other parts !
April 16, 2019
Fit
Part appears to fit and was a usual install. Longevity remains to be seen.
April 22, 2019
2008 Honda Civic Coupe Front Passenger Side Engine Mount
I have ordered other parts from 1AAuto before. Customer service and FREE shipping are excellent. The video you supplied was a time saver.I did not have to remove the top bracket from the new mount because the stud stayed screwed in to the engine. This is the 2nd front mount on my 2008 Civic Coupe with 70,000.The first replacement was covered under warranty after 32,000 miles. The Quality of this part is very similar to OEM but is 1/5 of the price. Thanks
August 7, 2019
Good price, Quality Parts
Really made a huge difference to driving performance. Parts are after market but seem to work just fine and fit like a charm on my 06 Honda Civic Coupe.
September 27, 2019
Exact fit, good cost
I like that it was exact fit, so no modification necessary. Price was much less than Honda OEM. I have no regrets in buying it.
September 29, 2019
Great service
Great service
October 8, 2019
Civic engine mount
The engine mount I ordered appears to be of good quality, but havent had a chance to change the part on my vehicle.
October 25, 2019
Great Auto parts and great prices
Got a Honda Civic front engine mount which perfectly fit and replaced the original one in my 2010 Civic. Customer Service was very responsive and helpful in expediting my order - I would definitely buy from 1A Auto again.
October 27, 2019
Buy here.
Bought a $35 one from Amazon made by a brand called Motor king. Car started crazy vibration. Replaced it with a 1AAuto one and car runs like a champ.
November 2, 2019
Silence is golden
1A Auto is clutch. For months I drive around with a bad engine mount and extremely noisey cabin. Installed the new mount from 1A Auto and the noise is finally gone. Long time purchaser for over a decade now. Thank you again.
December 19, 2019
Fit right,worked great!
The motor mount was for an 07 Honda Civic. Prices were all over for this mount. 1Aauto was a good price and the motor mount worked well. From horrible vibration to no vibration! Thanks 1Aauto!
March 2, 2020
Perfect fit
I was skeptical of buying an aftermarket product for my 2010 Honda Civic but I ended up making the right choice and went for it. My car was rumbling every time I used it because of the bad mount that I had. I followed the instructions of the video provided for this part (on youtube) and made the part switch. Car noise is gone and I’m glad I purchased 1aauto part
May 12, 2020
Excellent Product
100% recommended this product if your car is vibrating. Installed it and all vibrations were gone.
May 16, 2020
Perfect fit
Parts were a perfect fit for my car. I have a civic coupe which uses aluminum parts instead of rubber like the sedan model uses. 1aauto had the exact part i needed without breaking the bank.
July 2, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2006-11 Honda Civic Front Passenger Side Engine Mount TRQ-1AEMT00317 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.