Replaces

2006-11 Honda Civic Front Lower Control Arm 4 Piece Set

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Includes:   Ball Joint
  • Quantity:   4 Piece Set

Specifications:

  • Brand New Control Arm & Ball Joint
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:20)
    • Loosen the lug nuts with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Ball Joint (0:20)
    • Pull the knuckle toward you
    • Straighten the cotter pin
    • Remove the cotter pin from the castle nut
    • Loosen the nut with a 19mm wrench and dead blow mallet if needed
    • Remove the ball joint with a ball joint separator, ratchet, and socket
    • Remove the castle nut
    • Remove the ball joint from the lower control arm with a pry bar
  3. step : Installing the Ball Joint (5:18)
    • Clean the surface of the lower control arm
    • Insert the ball joint into the knuckle
    • Hand-tighten the castle nut
    • Maneuver the ball joint into the control arm
    • Tighten the bolts to the ball joint with a 17mm socket and ratchet
    • Torque the three lower nuts to 43 foot-pounds
    • Tighten the castle nut with a 22mm wrench
    • Insert the cotter pin
    • Bend the ends of the cotter pin
  4. step : Reattaching the Wheel (9:15)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Everything was perfectly fine I love it, and I always get it on time thanks again A1auto
September 2, 2018
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this the same quality as Honda OEM?
Jose Z November 11, 2018
It is close. Installing them is not easy. It is hard to line them up. The same issues happen if using the Honda part.
Ronaldo A T November 11, 2018
The product may not be exactly to one quality but it is adequate and I do not notice a difference while driving.
L O November 11, 2018
Does this fit the coupe model?
Rodrigo S December 7, 2018
Yes, according to the information you provided, this part will fit your vehicle as long as you do not have the SI model. Thank you!
Adam G December 7, 2018

Fits the following Makes:

Year Make Model Description
2006-2011Honda Civic Honda Civic (excluding SI Models) Front Lower Control Arm 4 Piece Set

Part Interchange

Brand Label Part Number
Beck / Arnley 101-5949
Beck / Arnley 102-5293
Beck / Arnley 102-5294
Beck / Arnley 101-5293
Beck / Arnley 101-5950
Beck / Arnley 101-5294
Beck/Arnley 102-5294
Beck/Arnley 101-5949
Beck/Arnley 102-5293
Beck/Arnley 101-5293
Beck/Arnley 101-5294
Beck/Arnley 101-5950
CARQUEST CA411B
CARQUEST CA410B
Dorman - OE Solutions 520-565
Dorman - OE Solutions 520-566
Dorman OE Solutions 520-566
Dorman OE Solutions 520-565
Honda 51360SNAA03
Honda 51350SNAA03
Honda OEM 51360SNAA03
Honda OEM 51350SNAA03
Ingalls Engineering CAK620382
Ingalls Engineering CAK620383
MAS Industries CA59163
MAS Industries CA59164
MAS Industries CA59164PR
MAS Industries CA59163PR
MOOG K500070
MOOG CK620383
MOOG CK620382
MOOG K620382
MOOG K500069
MOOG K620383
MOOG Chassis Products CK620383
MOOG Chassis Products CK620382
MOOG Chassis Products K500070
MOOG Chassis Products K620382
MOOG Chassis Products K620383
MOOG Chassis Products K500069
Mcquay-Norris FA4608
Mcquay-Norris FA4609
Mevotech GS60101
Mevotech MS60101
Mevotech MS60100
Mevotech GS60100
Mevotech CMS60101
Mevotech CMS60100
Mevotech MS60500
NAPA Premium 2605713
NAPA Premium 2605712
Precision Driveline CB60079
Precision Driveline 5CB60079
Precision Driveline CB60078
Raybestos Chassis 507-1442
Raybestos Chassis 507-1441
SYD 1509013
SYD 1509012

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASFK03316

Out of Stock