Replaces

2006-11 Honda Civic CV Axle Shaft Pair TRQ CSA82446 - 1AACS00069

Part Details

  • Quantity: Pair

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Brand New
    • Not remanufactured
    • No core charge
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:24)
    • Loosen the lug nuts with a 19mm socket with the vehicle on the ground
    • Pry off the center cap with a flat blade screwdriver
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (0:58)
    • Fit a flat blade screwdriver into the axle nut opening
    • Tap the screwdriver with a hammer
    • Secure the hub with a pry bar
    • Loosen the axle nut with a 32mm socket and breaker bar
  3. step : Removing the Axle (2:43)
    • Loosen the three 17mm bolts holding the ball joints to the control arm
    • Pry the control arm down with a pry bar
    • Tap the axle with a dead blow mallet
    • Remove the axle nut
    • Pull the axle out of the knuckle
    • Have a drain pan ready
    • Pry the axle out of the transmission
  4. step : Installing the Axle (6:15)
    • Seat the axle into the transmission
    • Tap the axle into the transmission with a dead blow mallet
    • Insert the axle into the knuckle
    • Reinstall the ball joint into the control arm
    • Tighten the three 17mm bolts to the ball joint
    • Torque the bolts to 43 foot-pounds
  5. step : Installing the Axle Nut (10:15)
    • Tighten the axle nut with a 32mm socket and ratchet
  6. step : Reattaching the Wheel (10:42)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    • Tighten the hub nut to 134 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Hammer
  • Center Punch

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 32mm Socket
  • 17mm Socket
  • 19mm Socket

5.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Happy Customer
I bought cv axles from Advanced aute for $90/axle. I returned them instantly when I looked at the price here. I saved just as much as I spent on A1 auto. no reason to spend so much at the auto store down the road when you can order theses and have them on your door step in 2 days... very pleased.
September 14, 2018
Purchased
3 weeks ago
Great!
Item is as described it fit in perfect. Quality seems just as good as original one. Will definitely buy parts here again.
July 31, 2018
Purchased
2 months ago
1st time using y'all
1st time using y'all ans everything went perfect, right parts and fantastic price along with fast delivery.

Thanks
June 30, 2018
Purchased
3 months ago
Perfect
I was worried because the price is so low. But these are great quality. Thanks.
May 31, 2018
Purchased
4 months ago
Honda Civic CV axle shaft pair
Very pleased with product. Great prices and fast shipping. Website is easy to navigate. I have ordered from this company many times and have always been pleased.
April 14, 2018
Purchased
5 months ago
Good quality parts and priced right. Was delivered earlier than expected. Would recommend to anyone needing parts. Working on my list of parts for a restoration project.
January 24, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 6 answers
Are the axles assembled completely ? So when I receive them I can just put them right in. Are they greased and torque to spec?
BRIAN A on Dec 2, 2016
BEST ANSWER: you will receive the axles as shown, pre greased and ready to install. Axle nut torque spec is per vehicle model so we'll need more details on your exact model to locate the specs for you 888-844-3393, call us so we can better serve you

Vehicle Fit

Year Make Model Description
2006-2011Honda Civic Honda Civic CV Axle Shaft Pair L4 1.8L with Automatic Transmission TRQ CSA82446

This part replaces:

  • TRQ CSA82446
  • A1 Cardone 66-4232
  • A1 Cardone 66-4233
Part #: 1AACS00069

Out of Stock

TRQ
Brand #: CSA82446

How-to Video:

(12:11 min)