This replacement tail light is just what you need to get your vehicle in good looking form again!

Tail light specifications:

  • RH Passenger Side
  • Replaces dealer Part Number: 33501SDAA11
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

This tail light makes a great replacement and has substantial cost savings over a dealer unit.

 

 

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Rear Bumper (0:58)
    • Pry out the screw caps on the bumper.
    • Remove the 10mm bolts on the bumper, the 6 Phillips screws in wheel wells.
    • Remove the two plugs under the bumper. If they won’t pull out cut them and replace them with a nut and bolt.
    • Pull the bumper out on each side.
    • Pull the bumper from the car.
  2. step : Removing the Taillight (3:26)
    • Remove the two 10mm bolts under the taillight.
    • Remove the panel to access the taillight bulbs.
    • Twist out the light sockets.
    • Remove the three 8mm bolts on the back side of the tail light.
  3. step : Replacing the Taillight (4:45)
    • Remove the bracket from the bottom of the old taillight and put it on to your new taillight.
    • Line up the pin on the taillight and push it into place.
    • Replace the five bolts on the taillight.
    • Twist the sockets back into the taillight.
    • Replace the taillight cover.
  4. step : Replacing the Rear Bumper (6:09)
    • Clean off the foam bumper.
    • Replace the bumper cover.
    • Push it in under the taillights.
    • Push in the sides of the bumper.
    • Replace the Phillips screws in the wheel wells.
    • Replace the 10mm bolts and covers.
    • Replace the plugs.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great value
Well worth every cent great value fit perfect would definite order again great sales perp and awesome communication
May 1, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005Honda Accord Honda Accord Sedan Outer Tail Light Passenger Side

This part replaces:

  • Hollander 166-59535B
  • DEPO 317-1969R-UF
Only 3 left in stock
Part #: 1ALTL00682


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:13 min)