This replacement tail light is just what you need to get your vehicle in good looking form again!

Tail light specifications:

  • LH Driver Side
  • Replaces dealer Part Number: 33551SDAA11
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

This tail light makes a great replacement and has substantial cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Rear Bumper (0:58)
    • Pry out the screw caps on the bumper.
    • Remove the 10mm bolts on the bumper, the 6 Phillips screws in wheel wells.
    • Remove the two plugs under the bumper. If they won’t pull out cut them and replace them with a nut and bolt.
    • Pull the bumper out on each side.
    • Pull the bumper from the car.
  2. step : Removing the Taillight (3:26)
    • Remove the two 10mm bolts under the taillight.
    • Remove the panel to access the taillight bulbs.
    • Twist out the light sockets.
    • Remove the three 8mm bolts on the back side of the tail light.
  3. step : Replacing the Taillight (4:45)
    • Remove the bracket from the bottom of the old taillight and put it on to your new taillight.
    • Line up the pin on the taillight and push it into place.
    • Replace the five bolts on the taillight.
    • Twist the sockets back into the taillight.
    • Replace the taillight cover.
  4. step : Replacing the Rear Bumper (6:09)
    • Clean off the foam bumper.
    • Replace the bumper cover.
    • Push it in under the taillights.
    • Push in the sides of the bumper.
    • Replace the Phillips screws in the wheel wells.
    • Replace the 10mm bolts and covers.
    • Replace the plugs.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Exactly what I wanted and great price
My only criticism is the lack of communication on order status - did not know when it would arrive or if shipped. But got here quickly
December 10, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005 Honda Accord Sedan Outer Tail Light Driver Side

This part replaces:

  • Hollander 166-59536B
  • OE # 33551SDAA11
  • DEPO 317-1969L-UF
Only 3 left in stock
Part #: 1ALTL00681

How-to Video:

(08:13 min)