1ASSP01024-2005-09 Subaru Outback Front & Rear 4 Piece Strut & Spring Assembly Set

Replaces

2008 Subaru Outback Front & Rear 4 Piece Strut & Spring Assembly Set

1ASSP01024-1007715-2008
Guaranteed to fit: 2008 Subaru Outback
FREE SAME DAY SHIPPING
Save 16%
List: $450.95 Save: $71.00
Part 1ASSP01024
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA57162

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   4 Piece

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    A professional alignment is recommended after this repair has been completed

  1. step : Removing the Wheel (0:26)
    • Find level ground
    • Loosen the lug nuts with the vehicle on the ground with a 19mm socket and breaker bar
    • Raise the vehicle with a floor jack from the jacking point behind the oil pan (do not jack up from directly underneath the oil pan)
    • Secure the vehicle on jack stands by placing the jack underneath the pinch weld and locking the jack
    • Remove the lug nuts
    • Pull off the wheel
    • Place the wheel underneath the side frame rail
  2. step : Removing the Strut (3:21)
    • Open the hood
    • Press the tabs and remove 12mm bolt and the ABS wire bracket from the strut
    • Remove the bolt on the brake line bracket with a 12mm wrench
    • Loosen the strut nuts with a 19mm socket and a breaker bar
    • Remove one bolt
    • Remove the three nuts from the top of the strut with a 12mm socket
    • Remove the bolt from the bottom of the strut
    • Lower the strut down and out
  3. step : Installing the Strut (10:19)
    • Transfer the bolts from the old strut to the new strut
    • Insert the strut up into place
    • Line up the bolt holes with the knuckle
    • Thread a nut on top by hand
    • Insert two lower strut bolts by hand
    • Tighten the three nuts evenly to the top of the strut with a 13mm deep socket and ratchet
    • Tighten the lower bolts with a 17mm socket and ratchet
    • Torque the bolts to 112 foot-pounds
    • Insert the brake line in place and tighten the 12mm bolt
    • Tighten the 12mm bolt to the ABS wire
  4. step : Reattaching the Wheel (16:04)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Raise the jack
    • Remove the jack stands
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 89 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Wrenches - Metric

  • 19mm Wrench


Fits the following Makes:

Year Make Model Description
2005-2009Subaru Outback Subaru Outback Front & Rear 4 Piece Strut & Spring Assembly Set

Part Interchange

Brand Label Part Number
KYB SR4492
KYB SR4491
KYB SR4490
KYB Shocks & Struts SR4490
KYB Shocks & Struts SR4491
KYB Shocks & Struts SR4492
Monroe 272566
Monroe 272567
Monroe 272565
Monroe Shocks & Struts 272566
Monroe Shocks & Struts 272565
Monroe Shocks & Struts 272567
Unity Automotive 11906
Unity Automotive 11905
Unity Automotive 15920

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: SCA57162
Product Reviews
4.80/ 5.0 15
15 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
12
3
0
0
0
struts
September 16, 2017
parts arrived promptly. Were exact fit. Quality appears to be better than expected. Will know more as these products wear.. So far ride is good, quiet and stable...
Like A Glove
January 26, 2018
The strut assembly comes as advertised. This is my 2nd second assembly that I have ordered. This strut assembly has worked on my 2005 and 2006 outback and installation takes less than 1 hour if you’re doing it by yourself. Very nice.
March 13, 2018
Good quality for price, easy bolt in replacements.
Purchase Review
June 5, 2018
The fully assembled struts are very easy to install. I highly recommend purchasing them this way.
November 13, 2018
All parts arrived on time and in perfect condition, very easy install do to the Supper easy video saved me 1,100.00 from the estate Thanks.. I will be back
November 30, 2018
These struts went in with no problems. All the brackets lined up perfectly with the brake lines and asb brakebrackets. Just like oem
Shock and strut combo
April 4, 2019
These guys were great. I am always leary about blind purchases for auto parts on line. Taking a leap of faith purchased struts and shocks combo from these guys and am very impressed. 2008 outback originals finally went out and replaced with there item. Coil overs were heavier than OEM and the ride is steady. Very prompt, dead on fit and will be working with these guys again. Stay straight and honest, thanks.
Subaru Outback Front & Rear Strut &Spring assembly
June 30, 2019
The parts came well packaged and marked. Super easy install and the car rides like new. I had my son do the replacement since it was his car. He was quoted $2k for same job. He was stoked that he saved $1800 and proud of himself. The video was excellent and the main reason I used A1.
Excellent: quality and delivery
July 22, 2019
These shocks/struts worked perfectly on my 2009 Subaru Outback. Delivered on exact date as advertised
August 8, 2019
Mechanic quickly installed and they have rid my outback of the noisy suspension along with the bouncing. Appear to be good quality.
Great product
October 5, 2019
Great fit and quality
Quality
October 15, 2019
I recently installed these springs on my 2008 Subaru Outback. Completely cured the rattle that most Outbacks develop over time due to the top part of the rear spring becoming worn and loose. Overall a good purchase. Just have to see if they last.
So far so good
November 9, 2019
I replaced front and rear struts using 1a auto Quick struts. The choice was primarily due to price. The struts made the old Suby ride like new. The car has 170K and this is the first replacement so the old struts were pretty shot. I dont know how long these will last. I doubt they will last as long as OEM or higher end struts. We only want to get another 80K miles so hopefully they will go that long. The struts raised the car a good three inches, maybe four. I think it may be a bit too high. Hopefully the car will drop a bit over time. My wife has not seen the car since I did the job and I am wondering if she will notice the extra height. The 1a auto DYI videos are good. However the job, particularly the rears are much much more difficult working on the floor on jack-stands compared to the video where the car is on a lift. The fronts are really easy. If the struts go the distance, I will be very happy. The local Firestone shop quoted $1000 plus tax. I am in for <$400
First time working on my own car!
February 21, 2020
These were the first parts Ive gotten to fix my car up myself. And the videos by 1A Auto made it so easy to learn how to replace the parts myself. Ill definitely be using this site to repair my car in the future!
Subaru struts
March 31, 2020
Easy to remove and install. The option of a video to assist when trouble arises is a nice feature. Thank you for on time delivery and tracking as well. Satisfied in MI.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
who is the manufacturer of these struts?
June 1, 2017
10
These are our 1A Auto struts, and built in either China or Taiwan.
June 1, 2017
10
Unity
June 1, 2017
What are the dimensions of the front and rear? And can these work on a foster?
October 5, 2018
10
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicles OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
October 5, 2018
Are these struts good for a Impreza Outback?
November 26, 2018
10
Yes. I bought them and they work great.
November 26, 2018
10
This part will not fit the Impreza Outback. We may have a part that is listed to fit. Please enter your vehicles year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle.
November 26, 2018
Will this fit my Baja?
February 8, 2020
10
Thanks for your inquiry. This part is not listed to fit the Subaru Baja. In order to check our inventory for the correct strut and spring assemblies can you please verify the year of your Subaru Baja?
February 8, 2020
10
Thank you for your reply. We currently carry the front & rear struts (without springs) in the Monroe brand. We also offer the front struts in the TRQ brand. We do not have the complete strut and spring assemblies for your 2005 Subaru Baja. Please let us know if you have any other questions.
February 11, 2020
How tall is the lift?
May 15, 2020
10
Lift? It’s OEM fit, no lift.
May 15, 2020
10
This is the stock ride height, no lift.
May 15, 2020
10
No actual lift. When installed the car will sit higher for about a month of driving before the springs settle. Then oem ride height
May 15, 2020
10
It’s not a lift it’s replacement parts
May 15, 2020
10
Stick height
May 15, 2020
10
Thank you for the inquiry. These are made to the same specifications as your OE parts.
May 15, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Subaru is a registered trademark of Fuji Heavy Industries Co., Ltd. 1A Auto is not affiliated with or sponsored by Subaru or Fuji Heavy Industries Co., Ltd. See all trademarks.

2005-09 Subaru Outback Front & Rear 4 Piece Strut & Spring Assembly Set TRQ SCA57162-1ASSP01024 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2008 Subaru Outback with these options.