Replaces

2005-06 Toyota Camry Fog / Driving Light Pair - 1ALFP00102

This pair of fog driving lights is just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog lights
  • Fog lights do not include bulbs or wiring

This pair of fog driving lamps is a great replacement and has good cost savings over a fog light from the dealer.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Servicing the Fog Light Bulbs (0:42)
    • Remove the four 10mm bolts from the splash shield
    • Pull the splash shield aside
    • Twist the bulb socket counterclockwise out of the light
    • Disconnect the wiring harness from the fog light bulb
    • Connect the wiring harness to the new fog light bulb
    • Twist the bulb clockwise into the light
  2. step : Removing the Fog Light (1:37)
    • Remove the two 10mm bolts from the fog light
    • Disconnect the fog light wiring harness
    • Pull out the fog light
  3. step : Installing the Fog Light (1:46)
    • Lift the fog light into place
    • If the mounting points have been broken, mark the mounting area with an awl
    • Pull down the fog light
    • Make new mounting holes with a 1/4" drill bit and drill
    • Lift the fog light into place
    • Insert two bolts into the fog light
    • Connect the fog light wiring harness
    • Push the splash shield into place
    • Insert the four 10mm bolts into the splash shield

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 1/4 Inch Drill Bit

  • General Tools

  • Flashlight

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Bent Tipped Awl

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Toyota Camry Fog / Driving Light Pair
Part #: 1ALFP00102


How-to Video:

(06:47 min)