1ASFK02123-2004-08 Chrysler Pacifica Suspension Kit 4 Piece Set


2004-08 Chrysler Pacifica Suspension Kit 4 Piece Set TRQ PSA56245


Part Details

  • Quantity: 4 Piece Set
  • Kit Includes: (2) Front Lower Control Arms with Ball Joints
  • Kit Includes: (2) Front Sway Bar Links

This part replaces:

  • Hollander 512-01394L
  • Hollander 512-01393R
  • Moog K621361
  • Moog K621362
  • Dorman 521-595
  • Dorman 521-596
  • Moog K7258
  • OE # AI
  • OE # AF
  • OE # 4743476AE
  • OE # 4743477AE
  • OE # 4743477AF
  • OE # 4743454AA
  • OE # 4743477AI
  • OE # 4743476AF
  • OE # 4743021AA
  • OE # 4743669AA
  • OE # 4743476AI
  • Mevotech MS25180
  • Mevotech MS25179
Save 33%
List: $209.95 Save: $70.00
Part 1ASFK02123
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA56245

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Front Lower Control Arms with Ball Joints
      (2) Front Sway Bar Links

These replacement front lower control arms & sway bar links are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.


  • Comes as a SET of 4
    • (2) - FRONT LOWER Control Arms with Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar Links - LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacements.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Hex Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

Fits the following Makes:

Year Make Model Description
2004-2008Chrysler Pacifica Chrysler Pacifica Suspension Kit 4 Piece Set

Part Interchange

Brand Label Part Number
Centric Parts 622.63008
Centric Parts 622.63007
Chrysler 4743476AG
Chrysler 4743476AE
Chrysler 4743476AH
Chrysler 4743477AG
Chrysler 4743477AE
Chrysler 4743477AI
Chrysler 4743476AI
Chrysler 4743476AF
Chrysler 4743477AH
Chrysler 4743477AD
Chrysler 4743477AF
Chrysler 4743476AD
Chrysler 4743021AA
Chrysler 4743454AA
Chrysler 4743669AA
DIY Solutions SUS05648
DIY Solutions SUS06610
DIY Solutions SUS05647
Dorman 521-596
Dorman 521-595
Dorman - OE Solutions 521-595
Dorman - OE Solutions 521-596
Dorman OE Solutions 521-595
Dorman OE Solutions 521-596
Ingalls Engineering CAK621361
Ingalls Engineering CAK621362
MAS Industries CB81324
MAS Industries CB81324PR
MAS Industries CB81323PR
MAS Industries CB81323
MOOG RK621361
MOOG RK621362
MOOG K7258
MOOG Chassis Products K7258
MOOG Chassis Products RK621362
MOOG Chassis Products RK621361
Mcquay-Norris FA3334
Mcquay-Norris FA3335
Mevotech MS25179
Mevotech GS25180
Mevotech MS25180
Mevotech CMS25180
Mevotech GS25179
Mevotech CMS25179
NAPA 2606341
NAPA 2606340
NAPA Premium 2606340
NAPA Premium 2606341
Precision Driveline 5CB25114
Precision Driveline 5CB25113
Precision Driveline CB25113
Precision Driveline CB25114
Raybestos Chassis 507-1817
Raybestos Chassis 507-1816
SYD 1506069
SYD 1506068

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA56245
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
suspension kit
Brought 2 quick struts, 2 lower control arms, & 2 sway bar links. OEM products fot like a glove. Rides very well. Great quality
July 13, 2017
Very excited
At first was a little bit skeptical about purchasing from this site. After receiving the parts Im extremely pleased the quality of the product is amazing. I received updates every time the parts moved that was great and comforting. Will be using them in the future for all my clients and my own vehicles as well.
September 5, 2017
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
does this fit a 2007 pacifica?
Dustin W February 16, 2016
As the title states: 2004-2008 Chrysler Pacifica Front Lower Control Arm & Sway Bar Link (Set of 4)yes these are correct for your model. You can follow this link to the basic listing of the part, then add your year, make, and model http://www.1aauto.com/2004-08+Chrysler+Pacifica+Control+Arm+%26+Sway+Bar+Link/I/1ASFK02123
Brian F February 17, 2016
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

2004-08 Chrysler Pacifica Suspension Kit 4 Piece Set TRQ PSA56245-1ASFK02123 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.