This replacement tail light is just what you need to get your Van in good looking form again!

This tail light features the following specifications:

  • RH (passenger's side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Chrysler mini van tail light makes a great replacement and has good cost savings over a dealer unit.


Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:34)
    • Pry out the center of the pins and pull the pins out on the side of the taillight.
    • Pull the taillight out,
    • Pry out the lock tab on the harness.
    • Disconnect the harness.
  2. step : Replacing a Bulb (1:32)
    • Squeeze the tabs and pull the socket out.
    • Pull the bulb out.
    • Push the new one in.
    • Push the socket back into place.
  3. step : Replacing the Taillight (1:52)
    • Connect the harness to the new taillight assembly.
    • Line up the taillight and push it into place.
    • Replace the two pins.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

4.6 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Tail light assembly
Excellent item. As good as OEM. Looks good works perfectly
April 21, 2018
4 months ago
perfect fit, speedy delivery
great replacement taillamp; easy install, fit perfectly, fair-priced and arrived in two days. very satisfied customer!
April 16, 2018
4 months ago
Good Replacement
The color representation matched the original tail light. The wiring was plug and play, and a nice bonus was that the housing included bulbs. My only negative comment was that there is a larger gap (compared to the original) between the lift gate and the light housing. I would say that it’s noticable up close but not at a distance.
November 2, 2017
10 months ago
Tail Light Assembly for Dodge Van
Part came in quickly. Having the video on changing the tail light was a great help. Replacement part was an improvement over the original design.
October 23, 2017
10 months ago
A Review Is Required ????!!!????
You're ordering me to write a review, who do knuckleheads think you are???

I'm "profit", you're "overhead" . . and this is the last product I'm buying from you.

Unbelievable . . .
September 20, 2017
11 months ago
Didn't Fit
The product was a passenger side tail light for a 2006 Caravan. It did not fit, so I sent photos of the original next to the replacement part. 1A agreed and promptly refunded my money, which increased my rating to three.
September 15, 2017
11 months ago
Fits like OEM
I would recommend this item for anyone having to replace a broken or separated tail lense assembly.
The electrical connector is easy to fit together and the lense slips into place without difficulty.
Was able to complete the replacement in under ten minutes start to finish. This included getting the flat blade screwdriver to remove the retaining pins to the time it took to throw away the old assembly.
Packaged well and arrived in the time promised,, would buy again.
September 6, 2017
11 months ago
Good Fit
Product arrived in a very timely manner and is a perfect replacement. Came with bulbs as well.
February 15, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2007 Chrysler Town & Country Tail Light Passenger Side
  • 2004-2007 Dodge Caravan Tail Light Passenger Side
  • 2004-2007 Dodge Grand Caravan Tail Light Passenger Side

This part replaces:

  • Partslink CH2801157
  • Hollander 166-02097R
  • OE # 4857954AA
  • TYC 11-6027-00-1
  • DEPO 333-1940R-AF
Part #: 1ALTL00318

Order must be placed by 4pm ET

How-to Video:

(03:58 min)