Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Corner Light 2001-04 Toyota Sequoia
How to Replace Tail Light 2000-2006 Toyota Tundra
Created on:
Tools used
Gloves
Phillips Head Screwdriver
1. Removing the Tail Light
Remove the Phillips clip on the parking light with a Phillips screwdriver
Disconnect the parking light wiring harness
2. Servicing the Bulbs
Twist the bulb socket counterclockwise out of the light
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
3. Installing the Tail Light
Connect the parking light wiring harnesses
Insert the parking light into place
Push in the Phillips clip
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the parking light on this 2001 Sequoia, same as any '01 to '04. We're going to show you both the bulbs as well as changing the entire light if one was broken. The only tool you'll need is a Phillips screwdriver.
You want to start out there's a little clip on here. Use a Phillips screwdriver and lightly turn in this center portion. It should come up and out. Once you get that up and out, the whole clip will come right out. Now, you just kind of get your light to move ground a little bit and then pull forward. You just lift the change bulbs.
I'll give you two ways: there are connectors on here and you just press the tab and disconnect them. These twist counterclockwise and the bulb comes out. The bulbs just pull out of these sockets. Put it back in. We'll put it back in, twist it clockwise to lock.
Nice new light from 1A Auto. Obviously great if you've broken one. It's going to go in just like the original. Plug it in first. There's a large line up tab here. Make sure that goes into the fender. Then this clip needs to clip into the headlight. Put that in there. Also up here, this goes right under the fender here. Push it back in. You should be all set.
Give it a little tap. It's back in place nicely. This clip is designed to just go in. Then you just push the middle down to lock it into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Impact Screwdriver
10mm Socket
Trim Tool Set
TY762-B000L
In Stock
Product Reviews
Loading reviews
4.67/ 5.06
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
2
0
0
0
Perfect!
MARK
March 4, 2017
Excellent on line Q & A chat and great price compared to OEM from the Toyota dealer here locally. Fit perfectly! Thanks
fixture works fine, but the mounting "pins" need to be glued
G
September 25, 2017
The fixture fit fine, looks great, and works like a charm. Very easy to install. Just don't over tighten the mounting bolts, because the mounting "brackets" are slightly less robust than the OEM version. Another tip: The plastic mounting "pins" pull out of the light fixture very easily. Make sure you use a little super glue to secure them to the fixture to avoid any problems. Very pleased with this purchase.
2006 Toyota Tundra Tail light
Chris
December 3, 2017
Tail light fit excellent. Looks just like the original on the other side. My only complaints are that it came with the reverse light bulb blown, I thought the wiring harness seemed a bit cheaper than the original, and the original harness wouldn't work because the original sockets wouldn't fit into the holes in the new tail light. Other than that, everything works fine,
Fit like a Glove
Richard
July 15, 2019
Perfect replacement. Easy to install and no problems. Identical to original.
Perfect Fit
Michael
July 30, 2020
Easy install and perfect fit, totally forgot I even did it. HaHa
Brenda
July 19, 2021
This is my go-to place for auto parts. Very pleased!
Customer Q&A
Will this fit the double cab?July 18, 2021
John K
10
Yes. I installed this on my 2004 tundra Limited double cab. Everything snapped into place perfectly.
July 19, 2021
W B
10
Yes. Thats what we own.
July 19, 2021
Brenda P
10
Yes I installed it on my 2006 double cab limited.
July 19, 2021
Michael W
10
It fit my 2005 Toyota Tundra Limited double cab just fine.
July 19, 2021
H E
10
Yes, this part is listed to fit your vehicle.
July 19, 2021
Cristina P
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.