This replacement power window regulator with motor is just what you need to get your Honda Pilot in good shape again!

This power window regulator with motor features the following specifications:

  • RH (Passenger Side) FRONT DOOR
  • Replaces dealer part numbers: 72210-S9V-A02, 72210-S9V-A01, 72210S9VA02, 72210S9VA01
  • Power operation
  • Direct replacement
  • Includes power window motor already assembled to regulator
  • Built to strict quality control standards

This Honda Pilot power window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: with Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:43)
    • Pry out the courtesy light
    • Remove the light bulb from the courtesy light
    • Pry off the sail panel
    • Pry up the switch panel with a flat blade screwdriver
    • Disconnect the wiring harnesses from the switch panel
    • Pry off trim piece inside the door handle
    • Remove the two Phillips head screw inside the door handle
    • Remove the Phillips head screw under the door pull
    • Remove the Phillips head screw inside the door pull
    • Pry out the top of the door handle out
    • Disconnect the door lock rod
    • Disconnect the door lock harness
    • Push the door handle into place
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the wiring harness from the door panel
    • Remove the three Phillips screws from the speaker
    • Disconnect the speaker wiring harness
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (4:27)
    • Disconnect the window motor lead
    • Push the window motor lead clip off
    • Push the yellow clip near the motor lead through the door
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the four 10mm bolts from the regulator
    • Remove the two 10mm bolts from the window track
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (6:29)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Insert the two 10mm bolts into the window track
    • Push the window motor lead into the door
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Connect the window motor lead
  4. step : Installing the Door Panel (8:35)
    • Connect the speaker wiring lead
    • Tighten the three Phillips screws to the speaker
    • Connect the wiring harness to the door panel
    • Lift the door panel into place
    • Push in the door panel clips
    • Push in the sail panel
    • Connect the lock rod to the door handle
    • Connect the door lock harness
    • Push the door handle into place
    • Tighten the two Phillips head screw inside the door handle
    • Tighten the Phillips head screw inside the door pull
    • Tighten the Phillips head screw under the door pull
    • Connect the wiring harnesses to the switch panel
    • Push the switch panel into place
    • Connect the bulb to the courtesy light
    • Push the courtesy light into place

Tools needed for replacement:

    General Tools

  • Utility Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Honda 2007 Pilot Window REgulator
It was easy to find what I was looking for on the Web site and price was good. The product was shipped fast and was a direct fit for my car. They also had a 1 year warranty on the product.
I would buy from them again.
May 29, 2018
Purchased
2 months ago
perfect service
perfect quality .. perfect fit ..good price .. thank u so much .. i will always buy from the site .. thank u so much
February 27, 2018
Purchased
5 months ago
Plot Window Regulator
Ordered, arrived on time. Correct part. Video is always helpful.

Thanks
August 17, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2008 Honda Pilot Front Power Window Regulator with Motor Passenger Side

This part replaces:

  • OE # 72210S9VA02
  • OE # 72210S9VA01
  • Hollander 125-58995R
  • Dorman 748-130
  • TYC 660119
Part #: 1AWRG00745

How-to Video:

(12:31 min)