1ABFS01718-2003-08 Honda Pilot Front Semi-Metallic Brake Pad & Rotor Kit

Replaces

2003-08 Honda Pilot Front Semi-Metallic Brake Pad & Rotor Kit TRQ BKA11299

1ABFS01718

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug
  • Front Brake Rotor Diameter: 11.81 in. (300mm)
  • Brake Rotor Coating: Premium G-Coated
  • Kit Includes: (2) Front G-Coated Brake Rotors
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • Reference Number MD943
  • OE # 45251TA6A00
  • OE # 45251S0X000
FREE SAME DAY SHIPPING
Save 35%
List: $140.95 Save: $50.00
Part 1ABFS01718
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11299

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Front Brake Rotor Diameter:   11.81 in. (300mm)
  • Brake Rotor Coating:   Premium G-Coated
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front G-Coated Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Electrostatic Coated Brake Rotor Features and Benefits

  • Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
  • Uniform coating without any overspray.
  • Enhanced appearance.
  • Designed to withstand 400 hours of saltwater exposure without rusting.
  • Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life.
  • Premium Positive Molded Brake Pads Features and Benefits

    • Same manufacturing process the original equipment manufacturers use
    • High density friction material for long pad life
    • Less resin content virtually eliminates brake fade and glazing
    • Reduced dusting for both Ceramic and Semi-metallic materials
    • Quality multi-layered shims & pad chamfering provide smooth & quite braking
    Manufactured from OE Grade G3000 Casting Alloy.
    G-Coated Brake Kit Features & Benefits
    • Longer life and less dust - Positive molded to ensure even wear and enhanced performance; cleaner wheels
    • Prevent rust - Coated to resist corrosion and withstand 400 hours of saltwater contact
    • Reduce vibration and noise - Balanced, finished surface
    • Cast from premium G3000 alloy for strength and durability

    Item Condition: New

    Attention California Customers:

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    Lifetime Warranty

    This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    1. step : Removing the Wheel (0:17)
      • Loosen the 19mm lug nuts and wheel lock key with the vehicle on the ground
      • Raise the vehicle with a floor jack
      • Secure the vehicle on jack stands
      • Remove the lug nuts
      • Pull off the wheel
    2. step : Removing the Brake Pads (1:19)
      • Remove the 12mm bolt from the brake hose bracket
      • Remove 12mm bolts from the brake caliper
      • Remove 17mm bolts from the brake caliper bracket
      • Pull the caliper and bracket aside and hang it with a bungee cord
    3. step : Removing the Brake Rotor (5:08)
      • Remove the screws from the rotor
      • Pull the rotor off
      • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
      • Clean the hub with a wire brush
    4. step : Installing the New Brake Rotor (7:48)
      • Clean both sides of the rotor with brake parts cleaner
      • Slide the rotor on
      • Thread on one lug nut to hold the rotor in place
      • Put the bracket back into place
      • Start the bolts by hand
    5. step : Installing the Brake Caliper and Bracket (8:48)
      • Put an old pad in the caliper
      • Use a large C-clamp and the old pad to push the pistons back
      • Install the new brake pads into the bracket
      • Put the caliper and bracket on
      • Tighten the caliper bolts
    6. step : Preparing the New Brake Pads (11:51)
      • Clean the brake pad clips with a wire brush
      • Put the brake pad clips into the caliper bracket
      • Clean the brake pad slides with a wire brush
      • Apply grease to the caliper slides
      • Apply grease to the brake pad tabs
    7. step : Installing the Brake Pads (13:57)
      • Place the brake pads on
      • Thread the caliper bolts in
      • Tighten the bracket bolt to the brake line
      • Tighten the caliper bracket bolts to 80 foot-pounds of torque
      • Tighten the brake caliper bolts to 27 foot-pounds
      • Torque the brake hose bolt to 16 foot-pounds
    8. step : Reattaching the Wheel (16:08)
      • Slide the wheel into place
      • Start the lug nuts by hand
      • Tighten the lug nuts preliminarily
      • Lower the vehicle to the ground
      • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    9. step : Testing the Brakes (17:08)
      • Pump your brakes repeatedly until they feel firm
      • Test your brakes at 5 miles per hour and then 10 miles per hour
      • Road test the vehicle

    Tools needed for replacement:

      General Tools

    • Large C-Clamp
    • Jack Stands
    • Rubber Mallet
    • Wire Brush
    • Floor Jack

    • Materials, Fluids, and Supplies

    • Safety Glasses
    • Gloves
    • Bungee Cord
    • Anti-Seize Grease

    • Ratchets & Related

    • Socket Extensions
    • Torque Wrench
    • Ratchet
    • 1/2 Inch Breaker Bar

    • Screwdrivers & Related

    • Pry Bar
    • Flat Blade Screwdriver
    • Phillips Head Screwdriver

    • Sockets - Metric

    • 12mm Socket
    • 17mm Socket
    • 19mm Socket
    • 21mm Socket

    • Wrenches - Metric

    • 17mm Wrench
    • 21mm wrench
    • 12mm Wrench


    Fits the following Makes:

    Year Make Model Description
    2003-2008Honda Pilot Honda Pilot Front Semi-Metallic Brake Pad & Rotor Kit

    Part Interchange

    Brand Label Part Number
    Aimco 31275
    DIY Solutions BFS00614
    Raybestos EHT914H
    Raybestos Brakes EHT914H

    This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

    FREE SAME DAY SHIPPING
    TRQ
    Brand #: BKA11299
    Product Reviews
    There are no reviews for this item.
    Customer Q&A
    Ask a question to 1A Auto customers who purchased the product
    No questions have been asked about this item.
    Customer service

    877-844-3393

    Monday - Friday 8:00am - 9:30pm ET
    Saturday - Sunday 8:00am - 4:30pm ET


    2003-08 Honda Pilot Front Semi-Metallic Brake Pad & Rotor Kit TRQ BKA11299-1ABFS01718 does not fit your:




    Same Day Shipping

    Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


    Guaranteed To Fit

    Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


    USA Customer Support

    Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


    Instructional Video Library

    Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

    Before proceeding,

    select your Vehicle, to verify this Part will fit.

    This part will only fit a vehicle with these options.