Replaces

2003-07 Toyota Sequoia Complete Strut Assembly & Shock Absorber Kit - 1ASSP01229

Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

2.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
0
1
0
Good service/Part performance lacking
I like the service provided by 1aauto, the part was delivered on time and the part fit perfectly. However the performance of the part is lacking. I know the strut assembly was inexpensive but I still expected them to perform better. I am actually considering upgrading to a higher quality part.
June 18, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I had a question about the limited lifetime warranty. I understand that is a lifetime warranty however what does it mean to be limited? Thank you!
An H September 17, 2016
It will not cover normal wear and tear.
Derek C September 19, 2016
Do the shocks come with the top rubber bushings?
Bill P October 7, 2017
No they dont
Willie O October 7, 2017
No, you have to use your existing bushings. They only supply the top shock nut.
F R October 7, 2017
No they Dont. and the rear shocks are quite a bit smaller in diameter than the stock ones. they are just ok.
Michael W October 9, 2017
The bushings will need to be re used or purchased separately.
Alex P October 9, 2017
Year Make Model Description
2003-2007Toyota Sequoia Toyota Sequoia Front & Rear Complete Strut Assembly & Shock Absorber Kit 4 Piece Set without Air Suspension
Part #: 1ASSP01229


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout