2003-07 Nissan Murano Headlight - 1ALHL01187

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Light Option:   Halogen


  • Driver Side
  • Includes lens, housing, and mounting panel
  • Bulbs not included
  • For Halogen models ONLY
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

    Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : To replace just the headlight bulb (1:00)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly in the engine bay and twist and pull the headlights out.
    • Unclip them from the harness and replace.
  2. step : Remove the two plastic covers over the head light assemblies (1:14)
    • Remove the 8 pins using your screwdrivers to pry them up.
  3. step : Remove the front grille (2:33)
    • Reach behind the center of the grille and pull up on the tab and pull the grill off.
    • Set aside.
  4. step : Loosen the fascia (3:22)
    • Remove the pins on the top of the fascia where the front grille was.
    • Remove the 10 mm bolt in each wheel well securing the edges of the fascia.
  5. step : Remove the old head light assembly (4:54)
    • Remove the four 10 mm bolts around the head light assembly by pulling the loosened fascia out of the way.
    • Remove the bracket securing the headlight assembly to the fascia.
    • Unplug the bulbs and harness.
  6. step : Install the new head light assembly (6:36)
    • Plug in the bulbs and harness.
    • Clip the HLA into place and replace the plastic bracket that secures the fascia to the headlight assembly.
    • Tighten the four 10 mm bolts.
  7. step : Re-assemble the front end (8:35)
    • Clip the fascia onto the head light assembly bracket
    • Bolt and clip the fascia back on completely.
    • Clip the front grill and plastic covers back into place.
    • Close the hood and enjoy your new 1A Auto headlights.
  8. step : N/A (0:01)

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2007Nissan Murano Nissan Murano Halogen Headlight Driver Side
Part #: 1ALHL01187

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:57 min)