Replaces

2003-05 Dodge Wheel Bearing & Hub Assembly Pair Front TRQ BHA53454 - 1ASHS00197

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Tapered Roller Bearing
  • Quantity: Pair
  • Front or Rear Location: Front

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • 3 bolt flange
  • Direct replacement
  • Replaces dealer part numbers: 52010206AB, 52010206AD
  • Fits 8 lug wheel
  • New wheel studs and ABS Sensor already installed
  • Fits only 2WD vehicles as listed

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

 

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.3 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
1
0
so far not so good.
bought the set for my truck a few months back, already had two failed hubs. The "DO NOT REMOVE"(assuming its some kind of dust cap) cap on the rear of the hub has come loose both times, i can hear it bouncing between the knuckle and the hub.

on a side note they fit perfectly and worked great all the way up until they failed.
December 28, 2017
Purchased
1 year ago
h2004 ram 2500 wheel bearing hubs
Good quality, fit perfect, worked great!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.
October 7, 2017
Purchased
1 year ago
GREAT VALUE
Very pleased with the assemblies. Although removing the old ones was a pain in the butt (265,000 miles on them), the installation was a breeze. GREAT PRICE as compared to others - why pay for a name. I could replace these 4 times for the price of one pair of brand name assemblies!!! And let's face it, they are ALL made in China.
June 26, 2017
Purchased
1 year ago
perfect fit, great price, delivery
These fit my 2005 Dodge Ram 2500 perfectly, and the shipping was very quick. Previously I had the shop change out the hubs the first time they went bad. This time I saved at least 800 in labor and 300 in parts by getting these very reasonably priced hubs from 1A Auto. Also, I opened up the ABS sensor hole and inserted a lot of grease, not under pressure, just the hose with no nipple, inserted in the ABS sensor hole. I put about 30 pumps of a standard size pistol-grip grease gun, turning at each pump. Once the space between the inner and outer bearings was full, I could feel the bearing tighten up. I scraped out excess grease from the abs hole and put the sensor in. I had done this previously on the old bearings (after they started sounding bad), so I knew it would not cause an ABS code. The ABS sensor is magnetic so as long as the grease is non-conductive and non-magnetic it is invisible to the abs.
New hubs installed very easy, I watched several You-Tube videos first. The electrical was the only hitch. I did have some difficulty getting the new ABS sensor line to go into the clip at the fender panel. You have to stick a screwdriver up the side slot to depress a plastic catch to get the old one disconnected. One side gave an ABS light on the dash, and I tried both of the old sensors before returning to the new line. What finally worked was bending the pins in the connector slightly, and then mashing the two sides of the connection together with pliers. It was difficult to get a good electrical connection at the plastic clip, and this took an hour of trial and error.
I would not hesitate to buy from 1A Auto again. I would not hesitate to change the hubs again, to save 1600 or more.
January 23, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2005Dodge Ram 2500 Truck Dodge Ram 2500 Truck Rear Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
2003-2005Dodge Ram 3500 Truck Dodge Ram 3500 Truck Rear Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ

This part replaces:

  • TRQ BHA53454
  • OE # 52010206AB x2
Part #: 1ASHS00197


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53454