Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Part Details
TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Okay friends, to do our front bushings for our sway bar, you don't have to take off the wheel or anything like that. You can just climb underneath the front of your vehicle, and you're gonna remove these two bolts right here, and then do the same on the other side. We'll get this bracket right off of there.
Now, if you're dealing with the original bushings, what you might find is that they're gonna want you to slip it down the whole bar to take it off. The easiest thing to do, though, is if you're replacing it anyway, just go ahead and make a slit. I like to turn it over. I'll make a slit right along the bottom side there. Now you can pull it right off. Let's go ahead and put a little bit of lubricant right on the bar. There we are.
Now it's gonna be time to install our brand new bushing here. I like to put it so the slit is gonna be facing down. There we are. Just kinda wiggle it around. Work in that grease. That's perfect. Do the same to the other side.
Let's go ahead and put a little copper never-seize inside of our bolt holes here. Do the same on the other side. Now let's look on the inside of this bracket right here. Just make sure there isn't any large chunks of anything coming up. If there is, just go ahead and chisel it off.
Now let's use a nice pry bar. We're gonna come under the bar, over the frame, pull this up just like this. Put your bracket on there, a couple loving bonks to try and line it up. Start in both of your bolts, and then do the same to the other side. Let's snug these up. Let's torque these to 45 foot-pounds. Do the same to the other side.
Tools used
Tools used
