2002-07 Jeep Liberty Hood Lift Support Pair - 1ALSP00133

Does your hood have trouble staying up? The problem could be the hood lift supports. These get weak over time and require replacing. No need to lose money at the dealer for this simple do it yourself replacement. Our lift supports are just what you need to allow your hood to stay up again!

Specifications:

• Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side)
• Replaces dealer part number: 55360411AC, 55360411AB
• 100% tested prior to leaving the factory
• Built to strict quality control standards

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Remove the hood support strut (0:35)

• Secure the hood with a secondary support of some kind, such as a helper, a broomstick, or a dowel.
• Use a flat blade screwdriver to pry out the clips on either end of the strut.
• Pull the strut off the two studs.

step : install the new hood support strut (1:20)

• Snap the two ends onto the two studs.
• Secure the clips into place.
• Lower the hood.