1ASSL00237-2002-07 Jeep Liberty Front Driver or Passenger Side Sway Bar Link

Replaces

2002-07 Jeep Liberty Front Driver or Passenger Side Sway Bar Link TRQ

1ASSL00237

This part replaces:

  • Moog K7391
  • OE # 52088662AB
  • TRQ PSA67802
FREE SAME DAY SHIPPING
Save 33%
List: $44.95 Save: $15.00
Part 1ASSL00237
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA67802

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 52088662AB
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:40)
    • Pry off the hub cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:05)
    • Hold the upper sway bar link stud with a 15mm wrench
    • Remove the upper nut from the sway bar link with an 18mm socket and ratchet
    • Tap the bolt out with a hammer
    • Hold the lower sway bar link stud with a 15mm socket and ratchet
    • Remove the lower nut from the sway bar link with an 18mm socket and ratchet
    • Tap the bolt out with a hammer
    • Use a hammer and pick if necessary
    • Pull off the sway bar link
  3. step : Installing the New Sway Bar Link (1:59)
    • Push the new sway bar link into place
    • Thread the top 15mm bolt into place
    • Start the top 18mm nut by hand
    • Thread the bottom 15mm bolt into place
    • Start the bottom 18mm nut by hand
    • Hold the upper sway bar link stud with a 15mm wrench
    • Fasten the upper nut onto the sway bar link with an 18mm socket and ratchet
    • Hold the lower sway bar link stud with a 15mm socket and ratchet
    • Fasten the lower nut onto the sway bar link with an 18mm socket and ratchet
    • Tighten the 18mm nuts to 60 foot-pounds of torque
  4. step : Reattaching the Wheel (3:06)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the hub cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Pick
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 15mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2007Jeep Liberty Jeep Liberty Front Driver or Passenger Side Sway Bar Link

Part Interchange

Brand Label Part Number
DIY Solutions SUS06807
MOOG K7391
MOOG Chassis Products K7391

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA67802
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2002-07 Jeep Liberty Front Driver or Passenger Side Sway Bar Link TRQ-1ASSL00237 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.