1AEVC00035-2002-06 Nissan Altima Sentra Valve Cover


2005 Nissan Altima L4 2.5L Valve Cover

Guaranteed to fit: 2005 Nissan Altima

Fit Details

  • Engine Displacement (Metric): L4 2.5L

Part Details

  • Includes: Gasket

This part replaces:

  • Dorman 264-982
  • OE # 132643Z001
  • TRQ VCA92747
Save 7%
List: $80.95 Save: $6.00
Part 1AEVC00035
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: VCA92747

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Gasket

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Engine Cover (0:22)
    • Remove the four 5mm Allen bolts from the engine cover
    • Lift the cover off
  2. step : Removing the Ignition Coils (0:44)
    • Push in the clip and disconnect the connector
    • Remove the 10mm bolt from the ignition coil
    • Lift the ignition coils up and out
  3. step : Removing the Valve Cover and Gasket (1:39)
    • Remove the 10mm bolts holding the harness to the intake manifold
    • Pull the harness clip up and out of the valve cover
    • Loosen the PCV valve hose clamp
    • Disconnect the PCV hose
    • Loosen the breather hose clamp
    • Disconnect the breather hose
    • Follow the order sequence to remove the valve cover bolts
    • Break the valve cover free with a rubber mallet
    • Remove the valve cover
    • Place paper towels over the exposed engine parts for protection from debris
  4. step : Installing the Valve Cover and Gasket (4:45)
    • Press the valve cover gasket into the channel
    • Transfer the oil cap to the new valve cover
    • Transfer the harness clip over to the new valve cover
    • Remove the paper towels from the engine
    • Clean the engine mating surface with brake parts cleaner, away from the interior
    • Remove any RTV residue with a razor, away from the interior
    • Apply a small bead of RTV silicone to the raised slope at the front of the engine
    • Press the gasket cover onto the engine
    • Follow the order sequence to tighten the bolts, lightly with an extension
    • Tighten the bolts evenly 9 to 26 inch pound of torque in the sequence
    • Tighten the bolts evenly 65 to 82 inch pound of torque in the sequence
    • Reinstall the breather hose and hose clamp
    • Reinstall the PCV hose and clamp
    • Clip in the harness
    • Tighten the 10mm bolts to the harness
  5. step : Installing the Ignition Coils (10:28)
    • Insert the coil into the engine
    • Tighten the 10mm bolt to the coil
    • Connect the connector
  6. step : Reinstalling the Engine Cover (11:15)
    • Clean any leaked oil residue from the side of the engine with brake parts cleaner
    • Place the cover over the engine
    • Tighten the four 5mm Allen bolts

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Hex Wrenches

  • 5mm Hex Wrench

  • Materials, Fluids, and Supplies

  • Paper Towels
  • RTV
  • Cloth Rags
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
what is the torque specs to put the cover back on?
Charlue W December 27, 2016
unfortunately we do not have the torque spec you are looking for
Brian F December 28, 2016

Fits the following Makes:

Year Make Model Description
2002-2006Nissan Altima Nissan Altima L4 2.5L Valve Cover
2002-2006Nissan Sentra Nissan Sentra L4 2.5L Valve Cover

Part Interchange

Brand Label Part Number
DIY Solutions ENG00360

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: VCA92747
Product Reviews
4.52/ 5.0
33 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I found some plastic chips in the thread hole on the valve cover that caused extra time and work to clean it out. This must not happen to the quality part like you sell it. Poor final QA Inspection indeed.
March 1, 2017
not fitting item of my order
this item did not fit to my Nissan Sentra - it has to be returned, but still waiting for a shipping label. This return is taking too much time to be completed
October 16, 2017
Quality Parts
Ordered and received when 1AAuto said. Ordered parts from them before and have had no problems.
February 19, 2018
No more leaks
No need to pay dealer prices. The valve cover and gasket fit great. I was getting oil in the spark plug tubes, but it has stayed oil free since putting this on. It was easy and cheap and works. Nothing else needs to be said!
February 23, 2018
Did the job well...
The 2002-2006 Altima has issues with the small gaskets that surround the spark plug wells. They deteriorate over time and allow oil to seep beneath the coil pack boots, which cause spark plug misfires, followed by rough idling and lights up "service engine soon." These 4 gaskets cant be replaced because they are built in to the plastic valve cover, in which the whole set-up has to be replaced. So far, so good. No more issues with misfiring. I pulled the coil packs 10 days after installing this new cover and no more oil in the wells (previously, the 1st & 3rd wells had 2 inches of pooled oil.The pooled oil also deteriorated the coil pack boots which also needed to be replaced. A-1 gave a great quick video on proper installation and torquing, so 10 days later, there were no oil leaks from the valve cover gasket either. The cover came with a new PCV valve along with the main lip gasket. However, the main gasket was about 1/2" too small, so a day before you install, I recommend you insert the gasket into the underside and you will need to use gasket maker and vice clamps to hold it in place after stretching out the 1/2". Thats what I did and no issues or leaks!
March 27, 2018
GreatWhat I like the most reasonable price keep in touch with you through email products work quality and delivery was on time I will recommend them to anyone that exes me for advice an auto partsWrite your review here. It must be at least 50 characters long. Consider whether you would recommend this product and what you like or dislike about it.
April 21, 2018
Decent product
Its always easy to order and shipping is quick. The gasket that came with this set was kind of thin and blew out after I replaced it. I ended up buying a thicker gasket at a local shop and it has been fine since.
April 24, 2018
Not good as I thought
I bought a valve cover from 1 A auto. I put it on my my 2006 Nissan Altima. When I start the car it start leaking. While tightening one of the ignition coil holding thread (for the nut) pops up. So I took out the valve cover and installed the old one. After that it was fine. I wasted $53.00 in vain. I think it is poorly constructed.
May 30, 2018
Happy customer
Customer service is always great. Im satisfied with the service and product too.
August 6, 2018
great fit, good quality parts
This part came in sooner than expected, build quality is good and fit with no issues, 1A Auto sell the same parts as my local auto parts stores at way better price
August 29, 2018
August 30, 2018
This part matched the factory part perfectly
Everything was exactly the same and seemed of great quality. Haven’t had any issues with it since I’ve replaced it.
September 19, 2018
Fit perfectly, a breeze to install
The valve cover for my 2006 Nissan Altima 2.5 SL fit perfectly. The gasket was already installed on the part. Easy out, easy in. Works great. Great price too.
October 23, 2018
Perfect Fit
Came sooner than anticipated! Gasket was already installed and installation was seamless. No more oil leakage or smoke!
November 19, 2018
02 Altima valve cover
Fit like a glove. No leaks! Even came with PCV valve. Best price I could find as well. Fast delivery too.
December 17, 2018
the best place
man! this place is grated costumer service upstanding, shipping really!---on point on time. The part fit well no problem. I really recommend this place to every body
December 21, 2018
Over all satisfied with part.
Ordering was hassle free, good price, and delivered promptly. Installation tip, Dont be afraid to put on a thin layer of Permatex before installing matter of fact, I would advise you too. Had to do my install twice the second time with some because of a small leak along the front edge.
February 15, 2019
Perfect for
Prefect fit and came fast
April 29, 2019
Good price, and delivered promptly. The instructions video is very helpful. Thank you.
May 1, 2019
No complaints, direct replacement
Perfect fit, came on time, I think even earlier. Gonna come back to you guys in the future for sure.
July 2, 2019
My Valve Gasket
I like that this part was affordable and works well in my car.Thank you! I will be ordering again from 1Aauto??
July 8, 2019
Perfect fit
Thankful for the ease of ordering and the you tube videos on how to replace valve cover and gasket was. It all helped out when my fiancé’s car had a leak to valve cover. Replaced valve cover and gasket along with coil packs and plugs. Her car works great and gets better fuel mileage now. Many thanks for your help!
August 7, 2019
Purchase of valve cover and gasket
1A Auto was recommended to me by my mechanic. To buy this part locally it would have cost $200.00. I only paid $64.95. This company not only saved me money, but time as well. Customer service was great and the part arrived just as they said it would. I will recommend 1A Auto to my family and friends.
August 8, 2019
Works great!!!
October 10, 2019
Valve cover
I strongly recommend A1auto!
November 6, 2019
great product and price thanks
November 7, 2019
Great part.first class.would buy. again. Great video on how to do it yourself
March 26, 2020
Excellent Replacement Part
Ordered this as opposed to a 3Xs the price part that just has a OEM name to it..Part has been installed and works perfectly as needed at 1/3rd of the price, couldnt be any happier.
May 12, 2020
Easy fix
Reasonable price fixed problem
May 12, 2020
05 nissan altima valve cover gasket
Part fit, amazing price and delivery. No problems yet. Delivery and price was amazing and on point. New customer to 1a auto. Completely beats all local parts houses prices, hands down.
June 16, 2020
Leak #4 spark plug
Sparkplug seal came lose after awhile. I had to clean it up and fix it myself. Cyclinder number 4 had oil in sparkplug because of that problem.
June 22, 2020
2006 altima
worked great would buy again. fit was great.
July 1, 2020
Great Product
Exactly what I needed. No different from the OE
August 15, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Nissan is a registered trademark of Nissan Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Nissan or Nissan Motor Co., Ltd. See all trademarks.

2002-06 Nissan Altima Sentra Valve Cover TRQ-1AEVC00035 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2005 Nissan Altima with these options.