1AEEK00829-2002-06 Nissan Altima Sentra Valve Cover Kit

Replaces

2005 Nissan Altima L4 2.5L Valve Cover Kit

1AEEK00829-1168315-2005
Guaranteed to fit: 2005 Nissan Altima
FREE SAME DAY SHIPPING
Save 6%
List: $172.95 Save: $11.00
Part 1AEEK00829
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: VCA93551

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Kit Includes:
      (1) Valve Cover
      (1) Valve Cover Gasket
      (4) Ignition Coils

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement - Guaranteed to fit and function for your specific application
Quality Tested - built to a strict level of product standards.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Returns: Parts with electrical components cannot be returned once installed.

  1. step : Removing the Engine Cover (0:22)
    • Remove the four 5mm Allen bolts from the engine cover
    • Lift the cover off
  2. step : Removing the Ignition Coils (0:44)
    • Push in the clip and disconnect the connector
    • Remove the 10mm bolt from the ignition coil
    • Lift the ignition coils up and out
  3. step : Removing the Valve Cover and Gasket (1:39)
    • Remove the 10mm bolts holding the harness to the intake manifold
    • Pull the harness clip up and out of the valve cover
    • Loosen the PCV valve hose clamp
    • Disconnect the PCV hose
    • Loosen the breather hose clamp
    • Disconnect the breather hose
    • Follow the order sequence to remove the valve cover bolts
    • Break the valve cover free with a rubber mallet
    • Remove the valve cover
    • Place paper towels over the exposed engine parts for protection from debris
  4. step : Installing the Valve Cover and Gasket (4:45)
    • Press the valve cover gasket into the channel
    • Transfer the oil cap to the new valve cover
    • Transfer the harness clip over to the new valve cover
    • Remove the paper towels from the engine
    • Clean the engine mating surface with brake parts cleaner, away from the interior
    • Remove any RTV residue with a razor, away from the interior
    • Apply a small bead of RTV silicone to the raised slope at the front of the engine
    • Press the gasket cover onto the engine
    • Follow the order sequence to tighten the bolts, lightly with an extension
    • Tighten the bolts evenly 9 to 26 inch pound of torque in the sequence
    • Tighten the bolts evenly 65 to 82 inch pound of torque in the sequence
    • Reinstall the breather hose and hose clamp
    • Reinstall the PCV hose and clamp
    • Clip in the harness
    • Tighten the 10mm bolts to the harness
  5. step : Installing the Ignition Coils (10:28)
    • Insert the coil into the engine
    • Tighten the 10mm bolt to the coil
    • Connect the connector
  6. step : Reinstalling the Engine Cover (11:15)
    • Clean any leaked oil residue from the side of the engine with brake parts cleaner
    • Place the cover over the engine
    • Tighten the four 5mm Allen bolts

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Hex Wrenches

  • 5mm Hex Wrench

  • Materials, Fluids, and Supplies

  • Paper Towels
  • RTV
  • Cloth Rags
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 10mm Socket


Fits the following Makes:

Year Make Model Description
2002-2006Nissan Altima Nissan Altima L4 2.5L Valve Cover Kit
2002-2006Nissan Sentra Nissan Sentra L4 2.5L Valve Cover Kit

Part Interchange

Brand Label Part Number
DIY Solutions ENG00057
DIY Solutions ENG00360

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: VCA93551
Product Reviews
4.93/ 5.0 15
15 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
14
1
0
0
0
Perfect Fix
November 9, 2018
Ordered the parts, received what I ordered...very satisfied with the service...package came the day it was promised...my vehicle has been repaired and I will use A1 Auto again and recommend to family and friends. Outstanding!!!
Excellent Product
November 13, 2018
I had been having issues with my car for a while now. Looking for quality parts and at a decent price is hard to come across. Really like the site and the instructional videos on how to fix the issue. Since this purchase, I have purchased an upstream O2 sensor. My car is still not running; Not sure what could be causing the problem. I recently took it to Nissian and had a diagnostic test and the motor and transmission passed. I just need to find the right part to see what is causing the issue. I am looking to purchase the Exhaust Manifold with Catalytic Converter Assembly. One thing I do know, when every it do start, it will like it is brand new
Great Product, Great Price, Great Instructions
December 9, 2018
I am by no means a mechanic, so normally I would have had a mechanic replace my valve cover that was leaking oil into the spark plugs. After watching the 1a Auto video on YouTube, I decided to order the part and do the work myself. A job that would have cost me $1000 at the dealer, cost me $120 and 1 hour of my own time. No special tools needed. The car runs perfectly now. Thank you 1a Auto!
05 Nissan Altima Valve Cover
December 24, 2018
The parts were delivered on day they were promised ordering after midnight from California. The video was very detailed and made it very simple for a not every day mechanic to complete the job right. 100% satisfaction and no more oil in spark plugs.
Valve cover and coil kit replacement
February 14, 2019
Right from the start through to the end. Fast service. Correct date delivered. Awesome video to follow. I'm in my fifties (female). Tired of waiting for a mechanic. I changed this myself. It took me 2 hours...but I did it. I learned a lot by the video that was made by 1A Auto.??
Quality Parts For Less
April 19, 2019
Excellent Service, fast shipping. No hassle ordering and parts come as listed. Price beat local automotive store. Highly recommend 1A Auto for your part needs.
Amazing quality product. Fixed leaks and random misfire of car
June 19, 2019
Original valve cover was leaking out of gasket and oil was also found in cylinder 1 and 4. Ignition coil 1 and 2 where also not firing and ran Blue Driver on car and found code P0300 random misfire. Replaced valve cover which included valve cover gasket and spark plug gaskets and replaced all 4 coils and my fiance 2005 Nissan Altima started running like a champ again and no leaks and no codes.
June 19, 2019
Perfect purchase
Great company
July 24, 2019
I ordered some parts from 1AAuto and was not disappointed.
Outstanding
August 23, 2019
I would definitely recommend a1auto to anyone who is trying to get really good OEM parts that are affordable. I spent so much time looking and looking for parts for my ‘01 Nissan Altima and then I found a1auto and I was very satisfied. It was quick and easy to find exactly what I needed.
Perfect fit for my 2002 Nissan Sentra Se r-Spec V
September 13, 2019
Worked great, No issue with item.
Valve cover leaking.
October 1, 2019
Had a bad valve cover leak. Replaced valve cover and gasket and fixed the leak. Fitment Was perfect. A+.
Perfect fit
January 17, 2020
It fit well. It wasn't too difficult, you just have to follow all the steps. They have videos on certain repairs.
Value cover replacement kit
March 29, 2020
I am not a mechanic but the helpful how to video and correct parts I was able to replace my valve cover and fix my car. The parts are working great and no other issues with my car now. Thanks a1 auto for saving me a lot of money by doing it myself
Excellent service
April 20, 2020
Ordered my part for my car online it was simple and very easy to do The part came on time and fit perfectly
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this kit include the spark plug tube seals also?
December 8, 2018
10
Spark plug tube seals are built in the valve cover gasket non serviceable non-removable that's why you have to buy the whole valve cover
December 8, 2018
10
Coil seals , yes
December 8, 2018
10
Yes they are intergrated into the valve cover all that's not included is the gasket maker for the front to seal properly
December 9, 2018
10
Are you referring to the spark plug gaskets? If so then...Yes, because they are a part of the valve cover. On my Nissan, only my spark plug gaskets had gone bad, but I had to replace the whole valve cover because they are integrated into the valve cover. Hope this helps.
December 9, 2018
10
The parts are apart of the valve cover so they are included within the kit.
December 9, 2018
10
Yes. The spark plug tube seals are built into the plastic piece.
December 10, 2018
Is the pcv valve included?
March 14, 2019
10
The PCV valve will not come included in this kit.
March 14, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Nissan is a registered trademark of Nissan Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Nissan or Nissan Motor Co., Ltd. See all trademarks.

2002-06 Nissan Altima Sentra Valve Cover Kit TRQ VCA93551-1AEEK00829 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2005 Nissan Altima with these options.