Matched TRQ Kit: Fit, lab, and road tested for peak performance
Application Specific Design: No modifications necessary
Heat Range and Life Cycle Tested: Exact match to stock specifications
Complete repair to restore your engine to like-new conditions
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Ignition Coils 2002-06 Nissan Sentra 2-5L
Created on:
Tools used
10mm Wrench
10mm Socket
Ratchet
1. Removing the Ignition Coil
Remove the 10mm bolt from the ignition coil
Disconnect the ignition coil wiring harness
Pull the ignition coil up and out
2. Installing the New Ignition Coil
Push the new ignition coil into place
Push the ignition coil onto the spark plug
Insert the 10mm bolt into the ignition coil
Connect the ignition coil wiring harness
Repeat these steps for the remaining coils
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, I want to show you how to replace an ignition coil on this 2006 Nissan Sentra; the only tool you'll need is a 10mm socket with a ratchet or a 10mm wrench. We replace one of the coils. We do recommend you replace them in a group of four for a four-cylinder engine.
It's pretty easy. They're right straight forward. A 10mm bolt holds the coil in. Remove that, pull on here, disconnect, and the coil comes up and out.
The new coil from 1A Auto is going to go in, just like the original one. Make sure you put it right down in the center there. You can feel it go down on to the spark plug. Then put it down on, put your bolt back in, and tighten it right down, nice and firm. Reconnect and then repeat for the other three.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
VCA93551
In Stock
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Nissan is a registered trademark of Nissan Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Nissan or Nissan Motor Co., Ltd.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.