1ABPS00854-2002-05 Hyundai Elantra Front Ceramic Brake Pads

Replaces

2002-05 Hyundai Elantra Front Ceramic Brake Pads

1ABPS00854

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi

This part replaces:

  • Reference Number AXCD941
FREE SAME DAY SHIPPING
Save 38%
List: $47.95 Save: $18.00
Only 5 left in stock
Part 1ABPS00854
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS04174

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic

Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Direct replacements
  • Professional Grade Ceramic Disc Brake Pads

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:53)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the hub cap
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:13)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads (1:46)
    • Remove the two 14mm bolts from the brake caliper
    • Pry off the caliper with a flat blade screwdriver
    • Pull the caliper aside
    • Pull off the brake pads
  4. step : Removing the Brake Rotor (2:35)
    • Remove the two 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the two Phillips head screws from the brake rotor with an impact screwdriver and a hammer
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:48)
    • Slide the rotor on
    • Insert the two Phillips screws into the rotor
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad or Channellock pliers to push the pistons back
    • Check that the caliper bracket slides move smoothly
    • Add grease to the bracket slides as necessary
    • Clean the brake pad slides with a wire brush
    • Put the caliper bracket back into place
    • Start the two 17mm bolts by hand
    • Tighten the 17mm bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:23)
    • Install the brake pad with the metal shield on the inside
    • Install the other pad on the outside
    • Put the caliper on
    • Thread the 14mm bolts by hand
    • Tighten the 14mm bolts to between 22 - 25 foot-pounds
  7. step : Reattaching the Wheel (6:11)
    • Straighten the rotor by hand or turn the steering wheel to turn the rotor
    • Make sure the rotor moves smoothly on the backing plate
    • Slide the wheel into place
    • Put the hub cap into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (7:06)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Impact Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 22mm Socket
  • 14mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2005Hyundai Elantra Hyundai Elantra Front Ceramic Brake Pads
FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS04174
Product Reviews
4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Brake Pads
Installed 2 weeks ago and working great so far. Perfect OEM fit.
October 3, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2002-05 Hyundai Elantra Front Ceramic Brake Pads-1ABPS00854 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.