1ASFK02751-2002-05 Ford Explorer Mercury Mountaineer Steering & Drivetrain Kit 4 Piece Set

Replaces

2002-05 Ford Explorer Mercury Mountaineer Steering & Drivetrain Kit 4 Piece Set TRQ

1ASFK02751

Part Details

  • Kit Includes: (2) Rear Wheel Bearing & Hub Assemblies
  • Kit Includes: (2) Rear Shock & Spring Assemblies
  • Quantity: 4 Piece Set
  • Bearing Type: Ball Bearing

This part replaces:

  • Hollander 538-01584
  • Hollander 538-01754
  • Monroe 181322
  • Monroe 171322
  • KYB SR4051
  • Hollander 538-01584, 538-01754
  • OE # 6L2Z1109B
  • OE # 3L2Z 1109 AA
  • OE # 3L2Z1109AA
  • OE # 6L2Z 1109 B
  • TRQ PSA59003
FREE SAME DAY SHIPPING
Save 35%
List: $360.95 Save: $126.00
Part 1ASFK02751
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA59003
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Bearing Type:   Ball Bearing
  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Rear Wheel Bearing & Hub Assemblies
      (2) Rear Shock & Spring Assemblies

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:40)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Disconnecting the Strut (1:06)
    • Apply rust penetrant to the strut mount nuts
    • Pry out the inner fender clips with a flat blade screwdriver
    • Pull off the inner fender
    • Remove the three 13mm nuts from the strut mount
    • Remove the 21mm bolt from the bottom of the strut
  3. step : Removing the Sway Bar Link (3:35)
    • Apply rust penetrant to the sway bar link
    • Turn the sway bar link with a 16mm socket and ratchet
    • Remove the 15mm nut from the top of the sway bar link
    • Hold the sway bar link sleeve with vise grip pliers
    • Loosen the sway bar link from the bottom with a 16mm socket and ratchet
    • Push out the sway bar link with a hammer and punch
  4. step : Removing the Strut (5:29)
    • Apply rust penetrant to the lower strut nut
    • Hold the strut bolt with an 18mm wrench
    • Remove the 21mm nut from the wheel knuckle
    • Loosen the two 21mm nuts that hold the control arm to the frame
    • Lift the wheel knuckle up
    • Pull the strut down and out
  5. step : Installing the Strut (6:41)
    • Lift the strut into place
    • Start the three 13mm nuts onto the strut mount
    • Turn the bottom of the strut to line up the bolt hole with the control arm
    • Push the 21mm bolt into the bottom of the strut
    • Push the 18mm bolt into the wheel knuckle
    • Fasten the nut onto the strut bolt
    • Tighten the strut bolt and nut
    • Fasten the nut onto the wheel knuckle bolt
    • Tighten the wheel knuckle bolt and nut
    • Tighten the three 13mm nuts on the strut mount to 20-25 foot-pounds of torque
  6. step : Installing the Sway Bar Link (8:44)
    • Put a washer on the sway bar link
    • Put a bushing on the sway bar link
    • Slide the sway bar link through the control arm
    • Put a bushing on the sway bar link
    • Put a washer on the sway bar link
    • Put the sleeve onto the sway bar link
    • Put a washer on the sway bar link
    • Put a bushing on the sway bar link
    • Slide the sway bar link through the sway bar
    • Put a bushing on the sway bar link
    • Put a washer on the sway bar link
    • Fasten the 15mm nut onto the sway bar link
  7. step : Tightening the Suspension Parts (9:30)
    • Support the suspension at ride height with a jack
    • Tighten the sway bar link nut to compress the bushings
    • Tighten the two bolts that hold the control arm to the frame to 110 foot-pounds
    • Tighten the wheel knuckle bolt to 110 foot-pounds
    • Put the inner fender into place
    • Push the plastic clips into the inner fender
  8. step : Reattaching the Wheel (10:39)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Wire Cutters

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 16mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 18mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2005Ford Explorer Ford Explorer 4 Door Steering & Drivetrain Kit 4 Piece Set
2002-2005Mercury Mountaineer Mercury Mountaineer Steering & Drivetrain Kit 4 Piece Set

Part Interchange

Brand Label Part Number
Chicago Rawhide BR930259K
Drive Tech America NT521000
Ford 6L2Z-1109B
Ford 1L2Z-1109AB
Ford 1L24-1109AC
Ford 1L24-1W002AA
Ford 1L2Z-1109AA
Ford 6L24-1109-AB
Ford 3L24-1W002AA
Ford 3L2Z-1109AA
Ford OEM 3L2Z-1109AA
Ford OEM 1L24-1W002AA
Ford OEM 1L2Z-1109AB
Ford OEM 1L24-1109AC
Ford OEM 6L24-1109-AB
Ford OEM 1L2Z-1109AA
Ford OEM 3L24-1W002AA
Ford OEM 6L2Z-1109B
GMB 725-0177
Gabriel G57018
Green Ball FP202BK
KYB SR4051
KYB Shocks & Struts SR4051
MOOG Hub Assemblies 521000
Mevotech H521000
Monroe 181322
Monroe 171322
Monroe Shocks & Struts 171322
Monroe Shocks & Struts 181322
Motorcraft HUB-132
Motorcraft HUB-115
Motorcraft HUB-69
Raybestos 721000
Raybestos Brakes 721000
SKF BR930259K
Timken HA590259K
Unity Automotive 15060

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA59003
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
great quality great prices
Got my suspension kit quickly and at a great price. no auto parts store could beat 1a auto prices.
June 27, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2002-05 Ford Explorer Mercury Mountaineer Steering & Drivetrain Kit 4 Piece Set TRQ-1ASFK02751 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.