1ASFK02831-2002-05 Ford Explorer Mercury Mountaineer Inner & Outer 4 Piece Tie Rod Set

Replaces

2002-05 Ford Explorer Mercury Mountaineer Inner & Outer 4 Piece Tie Rod Set TRQ

1ASFK02831

Part Details

  • Set Quantity: 4 Piece

This part replaces:

  • Moog ES3461
  • Moog EV422
  • Hollander 2610-326592
  • OE # 1L2Z3280DA
  • TRQ PSA55202
FREE SAME DAY SHIPPING
Part 1ASFK02831
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA55202

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   4 Piece

Specifications:

  • Brand New Tie Rods
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
    • Put the wheel under the vehicle for added security in the event of a jack failure.
  2. step : Remove the brakes (2:00)
    • Remove the 13 mm sockets anchoring the caliper.
    • Wire tie the caliper up out of the way.
    • Use a 15mm socket to remove the caliper bracket
    • Remove the rotor
    • Remove the dust shield with your 8 mm socket and ratchet
  3. step : Remove the outer tie rod (3:00)
    • Use your pliers to remove the cotter pin from the tie rod
    • Remove the nut with your 21 mm socket and ratchet
    • Pull apart the tie rod with a tie rod puller.
    • Use a paint marker to mark where the top nut on the tie rod is.
    • Use two adjustable wrenches to remove the tie rod.
  4. step : Install the new tie rod (6:15)
    • Apply a little loctite to the inner tie rod
    • Screw on the outer tie rod to the inner tie rod up to your paint marker mark.
    • Fill the dust boot with grease
    • Reassemble the tie rod end, replacing the nut and cotter pin.
    • Reassemble the brakes and wheel.
    • See our other videos for more detailed instructions.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Liquid Thread Locker
  • Marker / Writing Utensil
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Lug Wrench
  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket
  • 15mm Socket
  • 21mm Socket

  • Specialty Tools

  • Tie Rod Puller

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this for the rear tie rods?
Justin W August 21, 2017
These are for the front of the vehicle!
Tim K August 21, 2017
No
D D May 6, 2020
Do these have grease inserts?
Sam A November 23, 2017
no they do not
Lance M November 23, 2017
No, these will be sealed from the factory and do not come with a grease fitting.
Alex P November 24, 2017
What brand are these?
Sam A November 25, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Adam G November 27, 2017

Fits the following Makes:

Year Make Model Description
2002-2005Ford Explorer Ford Explorer V8 4.6L Inner & Outer 4 Piece Tie Rod Set
2002-2005Mercury Mountaineer Mercury Mountaineer V8 4.6L Inner & Outer 4 Piece Tie Rod Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS02360
DIY Solutions SUS07581
DIY Solutions SUS07319
Ford F87Z3A130BA
MOOG EV422
MOOG ES3461
MOOG Chassis Products EV422
MOOG Chassis Products ES3461

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA55202
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perrfect
Fast easy and on sale my kind of shopping staff fully knowledgeable easy to order and FAST DEL
February 22, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2002-05 Ford Explorer Mercury Mountaineer Inner & Outer 4 Piece Tie Rod Set TRQ-1ASFK02831 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.