Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Black Trim
  • Replaces dealer part number: 81110-AA070, 81110AA070, 81150-AA070, 81150AA070
  • Headlights include lenses, housings, and mounting panel
  • Do not include bulbs or wiring
  • Fits SE models
    • Will fit LE & XLE models, but will have a different appearance

 

Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

These lights do not include bulbs. Occasionally lighting manufacturers do leave test bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, Parking light, Fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Step 1: To replace the bulb (0:52)
    • Reach into the engine bay behind the headlight assembly and twist and pull to remove the bulb.
    • Unplug the bulb.
    • Plug in the new bulb and twist and push it back in.
  2. step : Step 2: Remove the headlight assembly (1:50)
    • Remove three 10 mm bolts- two around the headlight assembly you are working on and the one by the opposite headlight assembly.
    • Use a flat blade screwdriver to remove the pushclip on the bumper cover in the center.
    • Remove the pushclips on the bumper cover on the wheel well.
    • Remove a fourth 10 mm bolt in the bottom outside corner of the headlight that you have exposed by partially freeing the bumper cover.
    • Unplug the bulbs.
  3. step : Step 3: Install headlight assembly (4:43)
    • Plug the harness into the new headlight assembly
    • Clip the headlight into place.
    • Use your 10mm socket and ratchet and bolt the assembly back in.
    • DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clip the bumper cover back on and use your 10 mm socket and ratchet to bolt the bolt by the far headlight back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
2004 Camry SE Headlights w/Black Trim
The headlights came in 2 boxes and were well packed. THe units were close to OEM measurements. The bulbs were from AU Lite. I was told by customer support these light bulbs are They are the correct assembly. The only flaw is the top rubber gasket has separated from both of the light units.. Currently I am waiting to use Permatex clear adhesive on them.
November 22, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Mine is 2002 Camry XLE. Says it fits with different appearance. What does that mean?
Paulinports on Jan 26, 2018
BEST ANSWER: The inside of the lights (the bezel) will sometimes be either chrome or black and may be different than what came on your vehicle from the factory. They will still fit and take the same bulb types as the factory light. Thank you!

Vehicle Fit

  • 2002-2004 Toyota Camry SE Headlight with Black Trim Pair

This part replaces:

  • OE # 81110AA070
  • OE # 81150AA070
  • Partslink TO2502138, TO2503138
Part #: 1ALHP00358

Out of Stock

How-to Video:

(08:55 min)