Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Light Option:   Halogen

Specifications:
  • RH (Passenger Side)
  • Includes lens, housing, and mounting panel
  • Includes integrated parking/marker lamp
  • Bulbs not included
  • Replaces dealer part number: 26010-3Z626, 260103Z626
  • Does not fit HID (High Intensity Discharge - Xenon) lighted vehicles
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Removing the Headlight (0:41)
    • Remove the Phillips head screw underneath the inner fender
    • Pull back the inner fender
    • Remove the two 10mm bolts from behind the inner fender
    • Pry off the plastic clips from the bumper cover with a flat blade screwdriver
    • Remove the two 10mm bolts from the top of the headlight bracket
    • Pull the bumper cover out
    • Remove the 10mm bolt underneath the headlight
    • Pull the headlight out
    • Disconnect the headlight wiring harnesses
  2. step : Replacing the Bulbs (3:15)
    • This step is only necessary if you are replacing the headlight bulbs
    • Turn the base of the bulbs counterclockwise
    • Remove the old bulbs
    • Insert the new bulbs
    • Turn the new bulbs clockwise
    • For the main bulb, turn the cover counterclockwise
    • Disconnect the main bulb wiring clips
    • Pull up the main bulb wire retainer
    • Push the new main bulb in
    • Reconnect the wiring retainer
    • Reconnect the wiring clips
    • Reconnect the cover, turning it clockwise
  3. step : Installing the New Headlight (4:52)
    • Remove the turn signal bulb from the old light
    • Install the turn signal bulb in the new light
    • Connect the headlight wiring harnesses
    • Put the new headlight into place
    • Insert and tighten the two 10mm bolts at the top of the headlight
    • Pull back the bumper cover
    • Insert and tighten the 10mm bolt at the bottom of the headlight
    • Insert and tighten the 10mm bolt at the side of the headlight
    • Push the bumper cover back into place
    • Pull back the inner fender
    • Insert and tighten the two 10mm bolts behind the inner fender
    • Push the inner fender back into place
    • Insert and tighten the Phillips screw for the inner fender
    • Install the plastic clips for the bumper cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2004Nissan Altima Nissan Altima Halogen Headlight Passenger Side
Part #: 1ALHL00123


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:13 min)