Replaces

2002-04 Jeep Liberty Steering & Suspension Kit - 1ASFK05028

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 10
    • Fits LH (Driver Side) & RH (Passenger side)
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:40)
    • Pry off the hub cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:05)
    • Hold the upper sway bar link stud with a 15mm wrench
    • Remove the upper nut from the sway bar link with an 18mm socket and ratchet
    • Tap the bolt out with a hammer
    • Hold the lower sway bar link stud with a 15mm socket and ratchet
    • Remove the lower nut from the sway bar link with an 18mm socket and ratchet
    • Tap the bolt out with a hammer
    • Use a hammer and pick if necessary
    • Pull off the sway bar link
  3. step : Installing the New Sway Bar Link (1:59)
    • Push the new sway bar link into place
    • Thread the top 15mm bolt into place
    • Start the top 18mm nut by hand
    • Thread the bottom 15mm bolt into place
    • Start the bottom 18mm nut by hand
    • Hold the upper sway bar link stud with a 15mm wrench
    • Fasten the upper nut onto the sway bar link with an 18mm socket and ratchet
    • Hold the lower sway bar link stud with a 15mm socket and ratchet
    • Fasten the lower nut onto the sway bar link with an 18mm socket and ratchet
    • Tighten the 18mm nuts to 60 foot-pounds of torque
  4. step : Reattaching the Wheel (3:06)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the hub cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Pick
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 15mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:59 min)

Tools List:

    General Tools

  • Floor Jack
  • Pick
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 15mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench



This part replaces:

  • Moog ES3535
  • Moog ES3536
  • Hollander 538-01581R
  • Hollander 538-01582L
  • OE # 5114037AA
  • OE # 52128692AA, AB, AE, AF
  • OE # 52088662AB
  • OE # 52128693AA, AB, AE, AF
  • OE # 52128517AA, AE
  • OE # 5072445AA
  • OE # 5072444AA
  • Moog K3199
  • Moog K7391
  • Moog EV402

Vehicle Fit

  • 2002-2004 Jeep Liberty with ABS Brakes 10 Piece Set Steering & Suspension Kit
Part #: 1ASFK05028

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More