Replaces

2002-04 Jeep Liberty Steering & Suspension Kit - 1ASFK01152

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:06)
    • Mark the center of the tie rod end
    • Measure the distance from the end of the boot to the center of the tie rod end
    • Note that measurement
    • Remove the 21mm nut from the tie rod end
    • Loosen the 15/16 inch nut that connects the outer to the inner tie rod
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Lift the tie rod out of the wheel knuckle
    • Hold the inner tie rod with vise grip pliers
    • Twist off the outer tie rod
  3. step : Installing the New Outer Tie Rod (2:14)
    • Twist the new outer tie rod onto the inner tie rod
    • Start the 21mm nut onto the tie rod end
    • Hold the tie rod stud with a 10mm socket and ratchet
    • Tighten the nut with a 21mm wrench
    • Measure the distance from the end of the boot to the center of the tie rod end
    • This should be the same as the measurement from Step 2
    • Tighten the 15/16 inch nut
  4. step : Reattaching the Wheel (2:58)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern
    • Have your vehicle professionally aligned

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Measuring Tape

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 21mm wrench

  • Wrenches - SAE

  • 15/16 Inch Wrench

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Great deal, great price and fast shipping
When I shopped for each of these parts individually the price was far greater than this price. They arrived quickly and my Jeep is a happy Jeep. I would recthis to anyone.
April 29, 2018
Best deal
Perfect had everything I needed and priced Right and shipped fast
July 17, 2018
Great parts
Then my whole front end and everything fit everythings working right good parts for a reasonable price thank you
November 13, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Who is the manufacturer of this kit?
Thomas S January 21, 2018
I dont know who makes it, but my Jeep dealer installed it on my Liberty, so it works.
Simon L January 21, 2018
Not really sure but its good quality. Funny part is that Jeep is an American brand but the parts are all made in Japan!!!
Gary Lee Kim G January 21, 2018
Not sure but the quality is good.
Gary Lee Kim G January 21, 2018
Year Make Model Description
2002-2004Jeep Liberty Jeep Liberty 8 Piece Set Steering & Suspension Kit
Part #: 1ASFK01152


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:41 min)