1APBS00155-2002-04 Honda Odyssey Rear Ceramic Performance Brake Pad & Rotor Kit

Replaces

2002-04 Honda Odyssey Rear Ceramic Performance Brake Pad & Rotor Kit DIY Solutions BFS01727

1APBS00155
FREE SAME DAY SHIPPING
Save 34%
List: $142.95 Save: $48.00
Part 1APBS00155
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS01727

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Rear Brake Rotor Diameter:   12.32 in. (313mm)
  • Kit Includes:
      (1) Rear Ceramic Brake Pad Set
      (2) Rear Performance Brake Rotors
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits

  • Same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims & pad chamfering provide smooth & quite braking

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a single purchase of a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Performance Brake Kit Features and Benefits
  • Longer life - Positive molded to ensure even wear and enhanced performance
  • Less dust - Cleaner, quieter, smoother, includes 3 layer OE-grade shims
  • Better stopping power - Cross-drilled and slotted to reduce brake fade
  • Durable - True non-interference vane design for structural integrity and cooling

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:57)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:23)
    • Remove two 12mm bolts from the brake caliper
    • Pull the caliper toward the outside of the vehicle to push in the piston
    • Pull the caliper aside
    • Pull the brake pads out of the bracket
  3. step : Removing the Brake Rotor (2:15)
    • Remove the 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Loosen the rotor screws with a hammer and impact driver
    • Remove the screws
    • Pull the rotor off
  4. step : Installing the New Brake Rotor (3:34)
    • Slide the rotor on
    • Insert the rotor screws
    • Remove the rubber plug from the old rotor
    • Push the rubber plug into the new brake rotor with a screwdriver
    • Clean the bracket slides with a wire brush
    • Check that the bolt slides move freely
    • If necessary, clean and grease the bolt slides
    • Put the bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 45 foot-pounds of torque
  5. step : Installing the New Brake Pads (5:19)
    • Install the new brake pads into the bracket
    • Use a large C-clamp to push the piston back
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten bolts to 20 foot-pounds
  6. step : Reattaching the Wheel (6:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 - 100 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (7:31)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Hammer
  • Floor Jack
  • Large C-Clamp
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket


Fits the following Makes:

Year Make Model Description
2002-2004Honda Odyssey Honda Odyssey Rear Ceramic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31317
Bendix PRT5429
DIY Solutions BFS01727
DuraGo BR31317
Raybestos MGD865CH
Raybestos SGD865C
Raybestos EHT865H
Raybestos Brakes SGD865C
Raybestos Brakes MGD865CH
Raybestos Brakes EHT865H
Raybestos Brakes 980088
Wagner BD126010

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS01727
Product Reviews
5.00/ 5.0 1
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great parts!
March 4, 2020
Awesome, 1aauto delivers quality for half the price. I'm proud of my new rims and pads!
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2002-04 Honda Odyssey Rear Ceramic Performance Brake Pad & Rotor Kit DIY Solutions BFS01727-1APBS00155 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.