Replaces

2002-03 Lexus ES300 Toyota Camry Steering & Suspension Kit - 1ASFK02614

Specifications:

  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Lower Control Arms
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 12 Piece Set
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Steering Rack & Pinion Bellows
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:24)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with the vehicle on the ground
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:15)
    • Spray rust penetrant on the upper sway bar link nut
    • Clean the upper sway bar link nut with a wire brush
    • Hold the upper sway bar link nut with a 6mm hex socket and breaker bar
    • Loosen the nut with a 17mm wrench
    • If the nut is stuck, hold the sway bar link ball joint with locking pliers if necessary
    • Remove the 17mm nut
    • If the nut remains stuck, cut the sway bar link stud with a hack saw or reciprocating saw
    • Hold the lower sway bar link ball joint with locking pliers
    • Remove the 17mm bolt from the lower sway bar link stud
    • Remove the sway bar link from the vehicle
  3. step : Installing the Sway Bar Link (7:54)
    • Hang the sway bar link where it attaches to the strut
    • Slide the sway bar link stud into sway bar
    • Start the 18mm nuts onto the sway bar link studs by hand
    • Hold the sway bar link ball joints with an 18mm wrench
    • Tighten the nuts with an 18mm socket and ratchet
    • Torque the 18mm nuts to 55 foot-pounds
  4. step : Installing the Wheel (8:52)
    • Slide the wheel onto the hub
    • Start the lug nuts by hand, with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Sawzall
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 18mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench
  • 21mm wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Front end sust
It’s the first time I used this company for anything I was such and easy I even called to confirm I got the right parts customer service was excellent the parts fit perfect and rides like a dream again I highly recommend youwound be disappointed the parts even came in ahead of time
July 31, 2018
Purchased
1 month ago
Perfection
This Product Turned Out To Be Great Its Been A Little Over A Year Now And Everything Sill Feels Great On The Car Never Had An Issue I Recommend These Items 100%
July 29, 2018
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Will this fit 2003 v6 camry?
Trevor P on Jul 27, 2018
BEST ANSWER: Yes It Will Fit Your 2003 V6 Camry Perfectly, The Size Of Your Motor Will Not Affect This Product.

Vehicle Fit

Year Make Model Description
2002-2003Lexus ES300 Lexus ES300 12 Piece Set Steering & Suspension Kit
2002-2003Toyota Camry Toyota Camry 12 Piece Set Steering & Suspension Kit

This part replaces:

  • Hollander 512-58629R
  • Hollander 512-58630L
  • OE # 4333009160
  • OE # 4333009560
  • OE # 4333029405
  • OE # 4333029615
  • OE # 4334009010
  • OE # 4334009080
  • OE # 4334029175
  • OE # 4334029215
  • OE # 4334029615
  • OE # 4546009010
  • OE # 4547009010
  • OE # 4550309230
  • OE # 4550339225
  • OE # 4553506030
  • OE # 4806806070
  • OE # 4806806080
  • OE # 4806833050
  • OE # 4806906070
  • OE # 4806906080
  • OE # 4806933050
  • OE # 4882006040
  • OE # 4882028050
  • OE # 53534SZAA02
  • Dorman 520-401
  • Dorman 520-402
  • Reference Number BT-433
  • Moog ES3600
  • Moog ES3601
  • Moog K150272
  • Beck Arnley 103-3069
  • Moog K620333
  • Moog K620334
  • Moog K90346
  • Moog K90347
  • Moog K90344
  • Moog EV420
  • Reference Number BT-743H
Part #: 1ASFK02614


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:10 min)