This replacement Mazda Pickup tail light is just what you need to get your vehicle in good looking form again!

Tail light specifications:

  • LH Driver Side
  • Replaces dealer Part Number: 1F2051160
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

This tail light makes a great replacement and has substantial cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:46)
    • Remove the four screws securing the taillight.
    • Pull the taillight out.
    • Twist out the lower socket.
    • Push in the thumb and pull off the connector.
    • Twist out the upper socket.
    • Bulbs can be serviced at this time.
  2. step : Replacing the Taillight Assembly (1:38)
    • Twist in the upper socket.
    • Reconnect the harness.
    • Twist in the lower socket.
    • Line up the taillight assembly.
    • Push it into place.
    • Replace the four screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2009Mazda B2300 Truck Mazda B2300 Truck Tail Light Driver Side
2001-2009Mazda B2500 Truck Mazda B2500 Truck Tail Light Driver Side
2001-2009Mazda B3000 Truck Mazda B3000 Truck Tail Light Driver Side
2001-2009Mazda B4000 Truck Mazda B4000 Truck Tail Light Driver Side

This part replaces:

  • Hollander 166-59231
  • Partslink MA2800114
  • DEPO 316-1912L-US
  • OE # 1F2051160
Part #: 1ALTL00644


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:09 min)