Replaces

2001-07 Toyota Sequoia Strut & Spring Assembly Front Pair TRQ SCA57063 - 1ASSP00468

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
1
0
0
0
Great product and fast delivery.
Great product and fast delivery. Will definitely be doing business in the future.
April 9, 2018
Purchased
4 months ago
Great service!
The service and product was fantastic. I would recommend this company to anyone who needs parts. Their price was unmatched.
January 12, 2018
Purchased
6 months ago
2001 Toyota Sequoia parts
Thanks for the fast shipping, had my parts two days after I ordered them. All the parts fit perfect with no problems.
December 19, 2017
Purchased
7 months ago
Good Fit/DIY Installation
This is my first time installing struts or springs. Would recommend a diy-er without much experience like myself to order the combination instead of just changing struts. If you only change struts, you have to remove spring and strut assembly and then use (buy or rent) a spring compressor to remove strut from spring, then change strut and remove spring compressor. Too complicated/dangerous for me. With this combination, all you have to do is remove the 3 nuts on top and bottom bolt. then remove the spring/strut assembly and replace it with the new one.
I used You Tube for helpful hints too.
March 16, 2017
Purchased
1 year ago
One good one bad
The struts looks good out of the package. Install was straightforward. One of the struts had the lower bushing go bad. I contacted 1A Auto via email. They asked a couple questions about my vehicle, I attached a picture of the bad bushing and they immediately sent me out a replacement strut. Even with the time and effort to do the passenger side strut twice it was still way more economical than having a dealership or shop do it.
February 11, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 5 answers
Do these come as a set? So in the quantity drop down would I enter one or two?
Jeremy A on Mar 7, 2018
BEST ANSWER: These struts come as a pair for the driver and passenger side front. Thank you!
where are these made. what country?
Bob A on Apr 18, 2017
BEST ANSWER: These are manufactured in either Taiwan, or China and made to meet or exceed OE specifications. We back them using a limited lifetime warranty as long as you own the vehicle.

Vehicle Fit

  • 2001-2007 Toyota Sequoia Front Strut & Spring Assembly Pair TRQ SCA57063

This part replaces:

  • Monroe 171348L
  • Monroe 171348R
  • TRQ SCA57063
Part #: 1ASSP00468

TRQ
Brand #: SCA57063