2001 Hyundai Elantra Passenger Side Power Mirror

This replacement Hyundai Elantra mirror is just what you need to get your vehicle in good looking form again!

This Hyundai Elantra mirror features the following specifications:

• RH (Passenger Side)
• Power
• Manual Folding
• Replaces dealer part numbers: 87620-2D520, 876202D520
• Injected molded black plastic housing
• Mirror can be painted by the buyer to any color desired or installed as is
• Sail mount design - Mounts in the corner of the door
• Direct replacement mirror
• Built to strict quality control standards
• Unheated

We have noticed that there are many inferior quality mirrors on the market. We have researched other mirror manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket mirrors available. So don't be fooled by cheaper made imitation mirrors. Go with superior quality!

This Hyundai Elantra mirror makes a great replacement and has good cost savings over a dealer unit.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

step : Removing the Side Rear View Mirror (0:40)

• Pry off the mirror base trim piece with a flat blade screwdriver in cloth to protect the paint
• Disconnect the mirror wiring harness
• Remove the yellow clip with a flat blade screwdriver
• Insert the clip into the trim piece
• Remove the three 10mm bolts from the mirror
• Remove the Phillips head screw from the mirror
• Remove the mirror

step : Installing the New Side Rear View Mirror (2:07)

• Insert the headlight into its slot
• Insert the 10mm bolts to the mirror by hand
• Tighten the 10mm bolts without overtightening them
• Insert the Phillips head screw into the mirror
• Connect the mirror wiring harness
• Push in the mirror base trim piece