1ADHI01260-2001-06 Dodge Stratus Chrysler Sebring Front Passenger Side Interior Door Handle

Replaces

2001-06 Dodge Stratus Chrysler Sebring Front Passenger Side Interior Door Handle TRQ

1ADHI01260
FREE SAME DAY SHIPPING
Save 24%
List: $32.95 Save: $8.00
Part 1ADHI01260
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: DHA49875
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Color:   Chrome & Light Gray

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the anchor points (0:30)
    • Pry up the plastic plugs behind the door latch and door pull.
    • Remove the six Phillips screws, two under the plastic covers you removed and four around the edge of the door panel.
  2. step : Unclip the door panel (1:18)
    • Pry up the corner panel piece located by the side mirror.
    • Use your flat blade screwdriver and a rag if needed (to protect your paint) to work the door panel off.
    • Unclasp the door lock rod.
    • Disconnect the wiring harness.
  3. step : Remove the door handle (2:09)
    • Remove the two T20 bolts securing the handle on the inside of the door panel.
    • Pry out the clips on the switch.
  4. step : install the new door handle (2:41)
    • Clip the switch into the new door handle.
    • Bolt in with T20 Torx bolts.
  5. step : Re-install the door panel (3:01)
    • Clip the door handle/lock rod back into place.
    • Reconnect the wiring harness.
    • Fit the door panel back onto the door and click the clips back into a secure, locked position.
    • Screw in the Phillips screws and replace the plastic plugs behind the door pull and latch.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Star Drivers & Sockets

  • T20 Driver


Fits the following Makes:

Year Make Model Description
2001-2006Chrysler Sebring Chrysler Sebring Sedan Front Passenger Side Interior Door Handle
2001-2006Dodge Stratus Dodge Stratus Sedan Front Passenger Side Interior Door Handle

Part Interchange

Brand Label Part Number
DIY Solutions BHS02128

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: DHA49875
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2001-06 Dodge Stratus Chrysler Sebring Front Passenger Side Interior Door Handle TRQ-1ADHI01260 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.