Replaces

2001-05 Honda Civic Wheel Bearing & Hub Assembly Rear Driver or Passenger Side Timken 512174 - TKSHR00078

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Side Location:   Driver or Passenger Side
  • Front or Rear Location:   Rear

TIMKEN WHEEL BEARING & HUB ASSEMBLY: 512174

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assembly
  • Fits either LH (Driver Side) or RH (Passenger Side) REAR
  • Replaces dealer part number: 42200-S5A-A21, 42200S5AA21
  • Fits 4 Lug Wheel
  • New studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with Rear Drum Brakes only
  • Correct for models without ABS (Anti-Lock Brakes)

Note:
These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:04)
    • Loosen the lug nuts
    • Raise and secure the vehicle.
  2. step : Remove the hub (1:30)
    • Pull the drum off and set it aside.
    • Use a chisel and hammer to remove the hub nut cap.
    • Use a 32 mm socket and breaker bar to remove the hub nut.
    • Remove the hub.
  3. step : install the new hub (2:30)
    • Apply a small amount of grease to the inside of the hub.
    • Mount the hub and thread the hub nut on.
    • Torque the hub nut to 134 ft lbs
    • Put the center cap on and use a hammer to drive it on securely.
    • Replace the brake drum.
  4. step : Put the wheel on (3:30)
    • Put the hub cap on
    • Hand thread the lug nuts
    • Lower the vehicle
    • Use a criss-cross pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Chisel
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket
  • 32mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2005Honda Civic Honda Civic Rear Wheel Bearing & Hub Assembly Driver or Passenger Side L4 1.7L Models with Rear Drum Brakes without ABS Brakes Timken 512174
Only 4 left in stock
Part #: TKSHR00078


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Timken
Brand #: 512174

How-to Video:

(04:18 min)